Loading ...
Loading ...
Loading ...
Page 20
hose and regulator must be protected from sharp edges, hot surfaces, aggressive building materials that could
cut, melt, or damage the line. A separate approved gas line might be needed to go between the hose and
regulator and the grill to position the rubber line in a safe location.
4. Connect the regulator to the LP cylinder. Only hand-tighten the regulator.
5. Check for leaks using a soapy water solution by spraying on all connections, including all of the valves,
fittings, lines etc. (any and all gas connections have the ability leak and therefore it is critical to check for leaks
before each use)
6. To disconnect after you have used the appliance, turn the burner knobs to the OFF position.
7. Close the Cylinder Valve by turning the Hand Wheel counter-clockwise until it stops.
8. Disconnect the regulator from the LP cylinder after use.
Loading ...
Loading ...
Loading ...