Loading ...
Loading ...
Loading ...
Page 13
Keep any electrical supply cord and fuel supply hose away from any heated surfaces, sharp edges and dripping
grease.
Be certain your appliance is properly installed and grounded by a qualified technician in accordance with applicable
codes. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an
effective grounding system. It is imperative that this basic safety requirement be met. The manufacturer cannot be
held responsible for damages caused by the lack or inadequacy of an effective grounding system.
Do not operate any appliance with a damaged power cord or power plug, and do not operate any appliance after the
appliance malfunctions or has been damaged in any manner. If this should occur, return the appliance to the nearest
authorized service facility for examination, repair or adjustment.
This appliance conforms to all uniform electrical safety codes and electrical grounding regulations. Install unit
according to I.A.W. local codes or with National Electrical Code ANSI/NFPA 70 or CSA C22.1 in their absence.
Gas Safety and Installation Warnings
•
All gas connections should be made by a Professional qualified technician and in accordance with local codes and
ordinances. The installation must conform with local codes or, in the absence of
local codes, with either the national Fuel Gas Code, ANSI Z223.1/NFPA 54, or CAN/CGA-B149.1,
Natural Gas Installation Code or CAN/CGA-B149.2, Propane Installation Code.
•
Always check the Rating Plate to make sure the gas supply you are hooking up to is the gas type the
appliance is manufactured for.
•
Check the rating label on the left hand outside of the unit.
•
Do not twist the gas supply hose.
•
Before each use, visually inspect the gas supply hose for cracks, cuts or excessive wear. Replace the hose
if necessary. Check for gas leaks before each use.
•
Gas Specifications: Be sure that the gas supplied to the appliance conforms to the model you
purchased. A Natural Gas appliance requires natural gas to operate; an LP appliance requires liquid propane gas
RATING PLATE LOCATION
Loading ...
Loading ...
Loading ...