Loading ...
Loading ...
Loading ...
12
Treadmill
CT800
The 1/4-mile track (0.4 km) will be displayed around the dot matrix window. The ashing dot
indicates your progress. In the center of the track there is a lap counter for reference.
1/4 Mile Track
Next to the Dot Matrix window are three LED lights labeled: Track, Speed and Incline,
along with a display button. When the Track LED is lit the dot matrix displays the Track
prole, when the Speed LED is lit the Dot matrix displays the Speed prole and when the
Incline LED is lit the Dot Matrix displays the Incline prole. You may change the Dot Matrix
prole view by pressing the Display button. After scrolling through the three proles the Dot
matrix will automatically scroll through the three displays showing each one for four seconds. The
LED associated with each prole will blink while that view is displayed. One more press of the
Display button will return you to the Track prole.
The Pulse (Heart Rate) window will display your current heart rate in beats per minute during
the workout. You must use both left and right stainless steel sensors to pick up your pulse. Pulse
values are displayed anytime the computer is receiving a Grip Pulse signal. You may use the Grip
Pulse feature while in Heart Rate Control. The CT800 will also pick up wireless heart rate
transmitters that are Polar compatible, including coded transmissions.
Heart Rate Feature
Displays a graphical representation of your heart rate as a percentage of your estimated
maximum heart rate. When you enter your age during programming, the console will calculate
your maximum heart rate then light up the graph to show the percent of estimated maximum
heart rate you are currently achieving.
Heart Rate Bar Graph
Displays messages that help guide you through the programming process. During a program the
message window displays your workout data.
Message Window Display
The display will automatically turn off (go to sleep) after 30 minutes of inactivity. This function is
called sleep mode. In sleep mode, the treadmill will power down most everything except for a
minimum of circuitry for detecting key presses and the safety key so it will start up again if these
are activated. There is only a tiny amount of current used in sleep mode (about the same as your
TV when it is turned off) and it is perfectly ne to leave the main power switch on in sleep mode.
Of course you may also remove the safety key or turn off the main power switch to power
down the treadmill.
To Turn Treadmill Off
Loading ...
Loading ...
Loading ...