Loading ...
Loading ...
Loading ...
11
Treadmill
CT800
Press and release any key to wake display up if not already on.
Press and release the Start key to begin belt movement at 0.5 mph, then adjust to the
desired speed using the Up/Down keys. You may also use the rapid speed keys 2 through
6 to set to a specic speed directly.
To slow tread-belt press and hold the Down key (console or hand rail) to the desired
speed. You may also press the rapid speed adjust keys, 2 through 6.
To stop the tread-belt press and release red Stop key.
Quick Start Operation
Pause/Stop/Preset
When the treadmill is running the pause feature may be utilized by pressing the red Stop
key once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero
percent. The Time, Distance and Calorie readings will hold while the unit is in the pause
mode. After 5 minutes the display will reset and return to the start up screen.
To resume your exercise when in Pause mode, press the Start key. The speed and incline
will return to their previous settings.
Pressing the Stop key twice will end the program and a workout summary will be displayed.
If the Stop button is pressed a third time, the console will return to the idle mode (start up)
screen.
If the Stop button is held down for more than 3 seconds the console will reset.
When you are setting data, such as age and time, for a program pressing the Stop key will
allow you to go back one step for each key press.
Incline
Incline may be adjusted anytime after the belt starts moving.
Press and hold the adjust ^ / v keys to achieve desired level of effort. You may also choose
a more rapid increase / decrease by selecting a quick key, 2 through 6, on left hand side of
console (incline).
The display will indicate incline numbers as percent of grade (the same as grade of a road) as
adjustments are made.
Dot Matrix Center Display
Ten rows of dots indicate each level of a workout in manual mode. The dots are only to show an
approximate level (speed/incline) of effort. They do not necessarily indicate a specic value - only
an approximate percent to compare levels of intensity. In Manual Operation the Speed / Incline
dot matrix window will build a prole “picture” as values are changed during a workout. There
are twenty-four columns, indicating time. The 24 columns are divided into 1/24th of the total time
of the program. When the time is counting up from zero (as in quick start) each column
represents 1 minute.
Loading ...
Loading ...
Loading ...