Loading ...
Loading ...
Loading ...
6
Treadmill
CT800
1. The right side console mast tube (19) has computer cable A (87) pre-installed. Lift the tube off the walking
surface and attach it to the base frame. You need to gently pull on the computer cable as you line up the upright
tube, taking the slack out, so the cable does not get pinched between the tube and the base frame. Assemble
one bolt (104), split washer (58) and at washer (59) through the top hole in the retaining plate (21), and
corresponding top hole in the upright tube, and screw into the base frame. Now install the other two bolts
(104) and washers (58 & 59) and tighten all three securely.
2. Install the left console mast tube (18) in the same manner.
3. Install the lower side caps (32 & 33) with four screws (73).
HARDWARE
STEP 1: Console Mast Tubes
#59. 3/8”
Flat Washer
(6 pcs)
#104. 3/8” x 3-3/4”
Stainless Steel Bolt
(6 pcs)
#73. M5 x 12mm Self
Tapping Screw
(4 pcs)
#58. 3/8”
Split Washer
(6 pcs)
A
104
104
104
104
73
73
58
58
58
59
59
59
20
21
19
18
33
32
Loading ...
Loading ...
Loading ...