Kenmore 79093761000 range

Use & Care Guide - Page 5

For 79093761000.

PDF File Manual, 20 pages, Read Online | Download pdf file

79093761000 photo
Loading ...
Loading ...
Loading ...
BROILPAD_
Used to select _ O owJ_
the variable broil _ "_ _ O R_B_EAT
function. __
CLEAN PAD--_
Used to enter the
Used to selectthe OVEN, PREHEAT & LOCK LIGHTS-- The "OVEN" light TIMER PAD--
self-cleaning
cycle, will glow each time the oven unit turns on to maintain the
set oven temperature. The "PREHEAT" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven
temperature. The "LOCK" light willflash until the door
locks when the self-clean cycle is in use. It glows
constantly after the door locks.
I length of the baking
tlme
_STOP TIME PAD--
Used to set the m
desired stop time for Z
baking. Can be _')
used with BAKE I
TIME to program a ?J_
delayed bake cycle. I
Used to set or
cancel the minute
timer. The minute
timer does not
start or stop
cooking.
The oven can be programmed to:
Bake normally
Time bake
Broil
Self-clean
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed
operation. Push and hold []. After 7 seconds, the control will beep once. This will block the controls from
n
for silent
sounding when a pad is pushed. To return the sound, push and hold [] again for 7 seconds until 1 beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature conversions:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory, The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push (_. " "appears in the display.
2. Push and hold the {_ until "HI" appears in the display.
3. Push and hold _ until °F or °C appears in the display.
4. Push the _) or _ to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
5
Loading ...
Loading ...
Loading ...