Kenmore 79093761000 range

Use & Care Guide - Page 17

For 79093761000.

PDF File Manual, 20 pages, Read Online | Download pdf file

79093761000 photo
Loading ...
Loading ...
Loading ...
Changing Cooktop and/
or Oven Lights
(some models)
Be sure the range is unplugged and all parts are COOL before
replacing the oven light. Wear a leather-faced glove for protection against
possible broken glass.
To Change the Oven Light (some models)
On some models, the oven light automatically turns on when the door is
opened. Some models have a switch located on the control panel to turn on
the light. The oven light is located at the rear of the oven and is covered with a
glass shield held by a wire holder. The glass shield must be in place whenever
the oven is in use.
To replace the oven light:
1. Turn electricalpower offat the main source or unplug the range.
2. Press wire holderto one side to release the glass shield.
3. Replace bulbwith a new 40 watt appliance bulb.
4. Replace glass shield over bulb and snap wire holderintoplace.
5. Turn powerback on again atthe main source (or plug the range back in).
6. The clock(ifequipped) willthen need to be reset. To reset, see Setting
the Clock and Minute Timer inthis Owner's Guide. FI3
Note: The adjustments made willnot
change the se f-cleaning temperature.
r-
C/3
Adjusting Oven The temperature in the oven has been set at the factory. When first usingthe I
oven, be sure tofollow recipetimes and temperatures. If you thinkthe oven is
Temperature too hot ortoo cool, the temperature in the oven can be adjusted. Before
adjusting, test a recipe by using a temperature setting that is higher or lower
than the recommended temperature. The baking results should help you to
decide how much of an adjustment is needed.
To Adjust Oven Temperature:
1. Push (_.
2. Set the temperature to 550°F (287°C) by pushing and holding the _.
3. Within 2 seconds, push and hold _ until the special 2 digit display
4,
5.
appears. Release _ The display now indicates the amount of
degrees offset between the original factory temperature setting and the
current temperature setting. If the oven control has the original factory
calibration, the display will read "00."
The temperature can now be adjusted up or down 35°F (17°C), in 5°F
(1°C) steps, by pushing and holding the _ or _. Adjust until the
desired amount of offset appears in the display.
you have made the desired adjustment, push _ to go back to
When
the time of day display. When adjusting oven temperature, a minus sign
(-) will appear before the number to indicate that the oven will be cooler by
the displayed amount of degrees.
17
Loading ...
Loading ...
Loading ...