Loading ...
Loading ...
Loading ...
26
Basic Table Saw Operation
Fig. 34 Fig. 35
ON
OFF
Power Switch
To turn saw on: lift switch lever by pinching
side walls and pulling up. This action starts
the saw (Fig. 34)
To turn off power: push switch lever down to
its original position (Fig. 35).
To prevent unauthorized use, the switch can
accommodate a padlock with a long, 3/16" or
1/4" diameter shackle (not provided with
table saw), (Fig. 35).
Using the Smart Guard System
The Bosch Smart Guard has been designed
for modularity, enabling the use of multiple
combinations of the three main components
– 1 Riving Knife / Splitter, 2 Main Barrier
Guard, and 3 Anti-kickback Device (Fig. 36).
Additionally, the riving knife can be quickly
adjusted to three positions depending on the
application requirement: through cut (high),
non-through cut (middle), and dado (lowest).
The three primary components of the Smart
Guard blade guarding system are designed
for rapid attachment, adjustment, and/or re-
moval without the need for additional tools.
Any Smart Guard components that need to
be removed to complete a cut should be im-
mediately reinstalled when finished. See
pages 15–16 for detailed installation instruc-
tions. Always remember that the best acci-
dent prevention is the operator’s use of
common sense and alertness at all times
when using the table saw.
RIVING KNIFE / SPLITTER
The Riving Knife (splitter) is the central ele-
ment of the Bosch Smart Guard blade guard-
ing system, serving as the attachment point
1
2
3
Fig. 36
ABC
Fig. 37
2610048783.qxp_4100 11/17/17 9:10 AM Page 26
Loading ...
Loading ...
Loading ...