Loading ...
2
Table of Contents
Safety Symbols
The definitions below describe the level of severity for each signal word. Please read the manual
and pay attention to these symbols.
!
This is the safety alert symbol. It is used to alert you to potential per-
sonal injury hazards. Obey all safety messages that follow this symbol
to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, will result in minor or moderate in-
jury.
Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . .2
Table of Contents . . . . . . . . . . . . . . . . . . . .2–3
General Safety Rules . . . . . . . . . . . . . . . . .3–5
Additional Safety Rules . . . . . . . . . . . . . . .5–6
Double Insulated Tools . . . . . . . . . . . . . . . . . .7
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . .8–9
Glossary of Terms . . . . . . . . . . . . . . . . . . . . .10
Getting To Know Your Table Saw . . . . . .11–12
Unpacking And Checking Contents . . . . . . .13
Tools Needed For Assembly . . . . . . . . . . . . .14
Assembly . . . . . . . . . . . . . . . . . . . . . . . . .15–18
Attaching the Smart Guard System . . . . .15
Positioning The Riving Knife . . . . . . . . .15
Attaching The Guard Assembly . . . . . .16
Attaching The Anti-Kickback Device . . .16
Selecting and Changing the Blade . . . . .17
Using the Correct Blade . . . . . . . . . . . .17
Changing the Blade . . . . . . . . . . . . . . .18
Attaching Rip Fence . . . . . . . . . . . . . . . .18
Storage, Transportation, and Mounting .18–20
Miter Gauge Storage . . . . . . . . . . . . . .18
Rip Fence And Push Stick Storage . . . .19
Smart Guard System Storage . . . . . . . .19
Mounting The Table Saw . . . . . . . . . . .20
Adjustments . . . . . . . . . . . . . . . . . . . . . . .20-25
Adjusting Blade Parallel to the
Miter Gauge Slots . . . . . . . . . . . . . . . . . .20
Miter Gauge Adjustment . . . . . . . . . . .21
Rip Fence Adjustments . . . . . . . . . . . . . .22
Aligning Rip Fence . . . . . . . . . . . . . . . .22
Rip Fence Pointer Adjustment . . . . . . .22
To Set The Rip Fence Pointer: . . . . . . .22
Table Pointer Adjustment . . . . . . . . . . . .23
Riving Knife Alignment . . . . . . . . . . . . . .23
Checking Riving Knife Alignment . . . . .23
Adjusting Riving Knife . . . . . . . . . . . . .24
Adjusting the Table Insert . . . . . . . . . . . .24
Adjusting 0 and 45 Degree
Positive Stops . . . . . . . . . . . . . . . . . . . . .25
Adjusting 0 Degree Positive Stop: . . . .25
Adjusting 45 Degree Positive Stop: . . .25
Basic Table Saw Operation . . . . . . . . . . .26–42
Power Switch . . . . . . . . . . . . . . . . . . . . .26
Using the Smart Guard System . . . . . . . .26
Riving Knife / Splitter . . . . . . . . . . . . . .26
Main Barrier Guard . . . . . . . . . . . . . . . .27
Anti-Kickback Device . . . . . . . . . . . . . .27
Making Work Helpers . . . . . . . . . . . . . . .28
Making Push Stick and Push Block . . .28
Making Auxiliary Fence . . . . . . . . . . . . .28
Making a Featherboard . . . . . . . . . . . .28
Making The Facing Block . . . . . . . . . . .29
Making Rip Fence Auxiliary Facing . . . .29
Making Miter Gauge Auxiliary Facing . .30
Using the Push Stick and Push Block . . .30
Push Stick . . . . . . . . . . . . . . . . . . . . . .30
Push Block . . . . . . . . . . . . . . . . . . . . . .31
Pre-Cut Locator . . . . . . . . . . . . . . . . . .32
Blade Bevel Control . . . . . . . . . . . . . . .32
Extending Table Extension . . . . . . . . . .32
Using The Rip Fence . . . . . . . . . . . . . . . .33
Ripping . . . . . . . . . . . . . . . . . . . . . . . . .33
Bevel Ripping . . . . . . . . . . . . . . . . . . . .33
2610048783.qxp_4100 11/17/17 9:10 AM Page 2
Loading ...
Loading ...
Loading ...