Loading ...
Loading ...
Loading ...
Manual Convergence Adjustment Mode
(117 Point Manual Adjustment)
Using the Remote Control, select SETUP, MAGIC
FOCUS TUNE UP, MANUAL ADJUSTMENT MODE,
117 POINT MANUAL, START to access convergence
117 point pattern. The adjustment point is indicated by
the Adjustment Point Cursor.
To Move Adjustment Point
To move the Adjustment Point Cursor using the
CURSOR buttons, the Adjustment Point Cursor must
be WHITE. Another way to move the Adjustment Point
Cursor is to press the following buttons: [2] up, [4] left,
[5] down, [6] right. If you use the number buttons while
the adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-
BLUE-WHITE...). GREEN color is fixed and cannot be
adjusted.
To Adjust the Convergence
Move the Adjustment Point Cursor to the point to be
adjusted. Use the CURSOR buttons to match the RED
and BLUE colors to GREEN (reference color). Properly
aligned, all three colors should appear white.
If convergence is acceptable after MANUAL
CONVERGENCE adjustment, press EXIT button to
access menu mode.
1. Use the CURSOR buttons to highlight your chosen
option.
2. Press the SELECT button to select.
3. Select CANCEL to cancel adjusted data and return
to main picture.
4. Select DONE to save your adjustments and return to main picture.
5. Select BACK to return to the manual convergence adjustment mode.
6. Select RESET to recall the factory pre-set convergence data.
56
Loading ...
Loading ...
Loading ...