Loading ...
Loading ...
Loading ...
© 2020 United States Stove Company
27
OBSERVED PROBLEM POSSIBLE CAUSE SOLUTION
Heater produces a clinking/
ticking noise just after
burner is lit r shut off
Metal expands while heating or
contracts while cooling
This is common with most heaters. If
noise is excessive, contact a qualied
service person
Heater produces unwanted
odors
Heater burning vapors from paint,
hairspray, glues, etc. (see Important
above)
Ventilate room. Stop using odor
causing products while heater is
running
Low fuel supply Rell supply tank
Gas leak (see WARNING above)
Locate and control all leaks (see
Checking Gas Connections)
Heater shuts off in use
(ODS operates)
Not enough fresh air is available Open window/door for ventilation
Low line pressure Contact local propane co.
ODS/Pilot is partially clogged Clean ODS/Pilot
Gas odor even when control
knob is in OFF position
Gas leak see WARNING above).
Locate and correct all leaks (see
Checking Gas Connections)
Control valve defect Replace control valve
Gas odor during
combustion
Foreign matter between control
valve and burner
Remove foreign matter from gas
tubing
Gas leak (see WARNING above)
Locate and correct all leaks (see
Checking
Gas Connections)
TROUBLESHOOTING
Loading ...