Loading ...
Loading ...
Loading ...
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT
Your treadmillfeatures awalking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
an equipment-groundingconductorand a grounding
plug.Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Important: The treadmill is not compatible with
GFCl-equipped outlets.
This product isfor use on a nominal 120-volt circuit,
and hasa groundingplug thatlookslike the plug illus-
trated in drawingI below. A temporaryadapterthat
lookslikethe adapter illustratedin drawing 2 may be
usedto connectthe surgesuppressorto a 2-pole
receptacleas shown in drawing2 if a properly
groundedoutletisnotavailable.
Your treadmill, like any othertype ofsophisticated
electronicequipment,can be seriouslydamaged by
sudden voltagechanges in yourhome's power.
Voltage surges, spikes,and noiseinterferencecan
resultfTomweather conditionsor from otherappliances
beingturned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right). To purchase a surge suppressor, see
your local NordicTrack dealer or call 1-800-806-
3651 and order part number 146148.
Use only a single-outlet surge suppressor that is
UL 1449 listed as a transient voltage surge sup-
pressor (TVSS). The surge suppressor must have a
UL suppressed voltage rating of 400 volts or less
and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated
for 120 volts AC and 15 amps. There must be a
monitoring light on the surge suppressor to indi-
cate whether it is functioning properly. Failure to
use a properly functioning surge suppressor could
result in damage to the control system of the
treadmill. If the control system is damaged, the
walking belt may change speed or stop unexpect-
edly, which may result in a fall and serious injury.
This product must be grounded. Ifit shouldmalfunc-
tionor break down, groundingprovidesa path of least
resistancafor electriccurrentto reducethe riskof elec-
tric shock.This productisequipped with a cordhaving
_7_Grounded Outlet Box
_'-1 ,._ Surge Suppressor
_S_. Grounding Pin
Grounding Pin
Grounded Outlet G Plug
l_--Grounded Outlet Box
Adapter
_L ug__ _ Surge Suppressor
Metal Screw
The temporaryadapter should be used onlyuntila
properly groundedoutlet(drawing 1) can be installed
bya qualifiedelectrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metalscrew. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
8
Loading ...
Loading ...
Loading ...