Loading ...
Loading ...
Loading ...
4. Have a second person hold the Handrails (66) near the
Uprights (69) as shown. Connect the Upright Wire
Harness (98) to the wires extendingfrom the Console
Base (81). Insert the connectors and the Upright Wire
Harness into the hole in the right Upright.
Set the Handrails (66) on the Uprights (69), being careful
not to pinch the Upright Wire Harness (98).
66
5. Insert two Handrail Bolts(78) with Handrail Spacers
(77) intothe rightUpright(69) and the rightHandrail
(66). Be careful not to pinch the Wires. Make sure
that the Handrail Spacers are flushagainstthe right
Uprightwith the thicksides facingthecenter ofthe
treadmill,as showninthe inset drawing.Next, lift the
rightHandrail (66) slightlyand alignthe Boltswiththe
holesin the Handrail.Thread the Boltsintothe
Handrail. Do not tighten the Bolts yet.
Attach the left Handrail (not shown) in thesame way.
Tighten all four Handrail Bolts (78).
Thick
Side
6. Make sure that all parts are properly tightened before you use the treadmill. Note: If there is a thinsheet
of clear plasticon the hooddecal, removeit. Keep theincludedallen wrenchin a secure place.The allen
wrench isused to adjustthe walking belt (see page 27). To protectthe flooror carpetfrom damage, place a
mat under the treadmill.
Loading ...
Loading ...
Loading ...