Loading ...
Loading ...
Loading ...
4. Touch Bake Pad or Convect Bake Pad or Convect Roast Pad.
Indicator Words BAKE or CONV BAKE or CONV ROAST will flash and Display
wilt show three dashes.
5, Touch the appropriate number pads for desired oven temperature.
Example: If at 10 o'clock you set the oven for a probe temperature and to
convection roast at 325 °, after five seconds the Display will show:
When selected temperature has been reached, the oven will shut off and a chime
will sound four times. Plus, the actual probe temperature will flash and the word
"End" will be in the Display. These words will remain in the Display and a chime
will sound every minute for ten minutes or until the Cancel Off Pad is touched. If
the probe is not removed, a beep will sound continuously until the probe is
removed.
Note: Once selected internal temperature has been reached, unplug the probe
from the oven and remove food immediately to prevent overcooking.
with p__..._oving from .the oven.
Important: The probe must be unplugged and removed from oven when it is not
being used. If probe is left plugged in oven and Probe feature is not programmed,
a beep will sound continuously and PROBE will flash continuously.
To use Probe feature to start at future time and shut off
automatically
I IMPORTANT: Both estimated cook time and stop time must be set or oven wi!l I
start immediately. Therefore, follow all nine steps.
1-5. Follow preceding steps 1-5 on pages 22-23.
6. Touch Cook Time Pad.
Indicator Words COOK TIME wil! flash and Display will show "0 HR :00".
Note WW27430 Owners: The appropriate letter (U-upper oven; L-tower oven) and
OVEN will also flash.
7. Touch the appropriate number pads to entercooking hours in 5 minute increments.
Hours are to left of colon and minutes to right of colon.
(Allowable range is 5 minutes to 11 hours and 55 minutes.)
Example: tf cooking time selected for the oven is 2 hours and 30 minutes, the
D_sp_aywill show:
2:90 I 9s°I
COOK Tm_ OO_
23
Loading ...
Loading ...
Loading ...