Loading ...
Loading ...
Loading ...
SEM7(dis.27)
Warning!
The remote tted exhausting group (external motor) is built in class I plate, therefore it needs
the earth connection.
The appliance was designed to exhaust odors and vapors in the best way. The appliance is to
be installed on the outside wall of the house and connected to the cooker-hood which is in the
kitchen (g. 28)
Installation:
the mounting of the appliance is to be made by qualied technicians. Using the appropriate
drilling jig (g. 29) drill all the holes marked on it into the external wall, by paying attention not
to damage water pipes or power lines. The holes on the wall are to be drilled with a 8 mm. bit.
Insert,stepbystep,thefollowingpartsintheholesdrilled:
- the corresponding plastic dowels supplied (g. 29)
- the two telescopic pipes in the hole of 200 mm.
- the plastic pipe of 40 mm. diameter.
Before leaning the appliance against the wall, please remove the stainless steel carter using the
8 perimetrical screws (g. 30), then insert the supply cord in the plastic pipe. Fix the appliance
without the stainless steel external body, which was previously removed from the motor block,
by matching the holes of the motor block with the holes on the wall. Tighten with the screws
supplied.
Connectionofthepipes:
the appliance is endowed with an air entrance to be connected with the telescopic pipes and an
air outlet. After xing the appliance on the external wall, connect the two telescopic pipes (g.
12C), which are placed inside the wall, with the cooker-hood through the exible pipes.
The xing operations have to be carried out by using suitable metallic tools (pipes and tools
have to be supplied by the installers).
Electricalconnectiontothehood:
the unit is supplied with a pipe 7 meters long. After having let the cable pass through the plastic
pipe (g. 12E) placed in the wall (g. 12D), placed it closed to the unit and connect the 6 poles
connector (Fig. 12E) and the 2 poles connector (Fig. 12G).
In order to avoid water inltrations, please apply silicone on the product perimeter, close to
the wall.
Installationoftheexternalcarter:
mount the aesthetic carter making sure that the grill will match with the block motor air outlet
(dis. 30).
8
Loading ...
Loading ...
Loading ...