Sirius SLEM83BBQ12008 User Manual

Loading ...

SEM1(dis.1)-SEM8(dis.1a)

Warning!Theperipheralexhaustinggroup(remotettedextractionmotor)isbuiltinclass

II(symbolontheratingplate),thereforeitmustnotbeearthed.

The appliance is designed to exhaust fumes and odours very silently and in the best way. It

must be installed in the house and connected to the cooker-hood, which is in the kitchen (g.

Typesofinstallation: to make the installation easy, the appliance can be xed on the wall,

on the ceiling or on the oor in a horizontal position (g. 3 ) or vertically (g. 4) to the xing

level.

Note:intheverticalxing,thebracketssuppliedcanbeusedonlyonthelongestside(g.6).

Installationoftheappliance: after deciding the position and the type of installation, insert the

anti-vibration rubber caps in the holes of the brackets supplied (g. 5C).

Therubbercapsmustbeputonthesideswhichareincontactwiththewall.

Put the brackets (g. 5A) on the remote tted extraction motor by matching its holes with those

of the brackets. Fix with the screws supplied (g. 5B).

Put the group on the point previously chosen for the installation and mark the points on the wall

where the holes must be drilled.

Insert the dowels supplied in the holes (g. 6A). Put the remote tted extraction motor on the

wall by matching the holes of the brackets with the plastic dowels. Screw with the screws sup-

plied (g. 6B).

Connectionofthepipes: the appliance is endowed with an entrance and an outlet to connect

the pipes. Before connecting the exhaust pipes, check the direction of the air showed on the

external label (g. 7). Connect the pipes and x them with appropriate metal clamps (exhaust

pipes and metal clamps have to be supplied by the installer). The pipe (g. 7A) must be con-

nected with the cooker-hood placed in the kitchen, and the pipe (g. 7B) must be directed

outside the building.

ElectricalconnectionofthehoodSEM1: the appliance is equipped with a 7m electrical ca-

ble with a six- pin connection at one end. Insert it into the hood’s connection (External Motor

version)

ElectricalconnectiontothehoodSEM8:the unit is supplied with a pipe 7 meters long. After

having let the cable pass through the plastic pipe (g. 12E) placed in the wall (g. 12D), placed

it closed to the unit and connect the 6 poles connector (g. 12E) and the 2 poles connector (g.

12G).

Loading ...

Sirius SLEM83BBQ12008 120cm Canopy Outdoor Rangehood with External Motor