Loading ...
Loading ...
Loading ...
SEM5(g.21)
Warning! The remote tted exhausting group (external motor) is built in class II (see
symbolontheratingplate),thereforeitmustnotbeearthed.
This model has been specically studied to suction vapours and odours without noise.It should
be installed outside and connected to the hood in the kitchen (g. 22).
Roofinstallation: make a 22 x 22 cm square opening on the roof, and then insert the lower part
of the remote tted exhausting motor (g. 23).
Put the two brackets as shown in g 24A and mark the holes you are going to drill on the lower
part of the remote tted exhausting motor.
Make all the holes, and then fasten securely.
Insert the pipe connecting the hood outlet line with the upper part of the remote tted extrac-
tion motor (g.25A); the pipe should pass into the lower part of the remote tted exhausting
motor (g. 25).
Fix the pipe to the upper part of the remote tted exhausting motor with a metal hose clamp.
Assembly the upper and the lower part of the remote tted exhausting motor using the 8 screws
provided (g.25B).
Electricalconnectionofthehood: the appliance is equipped with a 7m electrical cable. Con-
nect it to the six-pin connection of the appliance in the kitchen.
7
Loading ...
Loading ...
Loading ...