Loading ...
Loading ...
Loading ...
Problem solving guide
44
Unexpected behaviour
Problem Cause and remedy
The power level selec-
ted is flashing.
The wok pan is not in position.
Place the wok pan in position.
The sensor controls
show increased sensit-
ivity or fail to react.
The sensitivity level of the sensor controls has
changed.
Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the Smart-
Line element. The area surrounding the SmartLine
element must not be too dark.
Take any pans off the SmartLine element and wipe
away any food deposits.
Ensure that there is nothing covering the entire
SmartLine element unit or sensor controls.
Interrupt the power supply to the SmartLine ele-
ment for approx. 1minute.
If the problem persists after power has been re-
stored, please contact Miele Service.
The wok has switched
itself off automatically.
It has been operated for too long.
Switch the wok back on again (see “Safety fea-
tures” – “Safety switch off”).
The overheating protection mechanism has been ac-
tivated.
See “Safety features” – “Overheating protection”.
The cooking zone is not
working in the usual
way on the power set-
ting selected.
The overheating protection mechanism has been ac-
tivated.
See “Safety features”.
The Booster has deac-
tivated early automatic-
ally.
The overheating protection mechanism has been ac-
tivated.
See “Safety features”.
Loading ...
Loading ...
Loading ...