Loading ...
Loading ...
Loading ...
Additional functions
33
Wipe protection
You can lock the SmartLine element
sensor controls for 20 seconds in or-
der to remove soiling, for example.
The sensor control is not locked.
Activating
Touch the sensor control.
The time counts down in the timer dis-
play.
Deactivating
Touch the sensor control until the
timer display goes out.
Demonstration mode
This function enables the SmartLine
element to be demonstrated in show-
rooms without heating up.
Activating/deactivating demonstra-
tion mode
Switch the SmartLine element on.
Touch the0 sensor on any of the nu-
merical keybanks.
Then touch the0 and 2 sensors at
the same time for 6seconds.
In the timer display, flashes altern-
ately with (demonstration mode ac-
tivated) or (demonstration mode de-
activated) for a few seconds.
Displaying the SmartLine ele-
ment data
The model designation and software
version of the SmartLine element can
be displayed. To do this there must not
be any pots or pans on the SmartLine
element.
Model designation
Switch the SmartLine element on.
Touch the0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 4 sensor con-
trols at the same time.
The timer display shows 2 numbers
flashing alternately:
flashes alternately with = CS 1234
Software version
Switch the SmartLine element on.
Touch the0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 3 sensor con-
trols at the same time.
Numbers will appear in the timer dis-
play:
: = software version
Loading ...
Loading ...
Loading ...