Loading ...
Loading ...
Loading ...
Programming
37
You can adapt the programming of the
SmartLine element to your personal
needs. Several settings can be altered
in succession.
After accessing the programming
mode, the symbol and will appear
in the timer display. After a few seconds
: (programme 01) will flash altern-
ately with : (code) in the timer dis-
play.
Changing the programming
Accessing programming mode
With the SmartLine element
switched off, press and hold the
and sensor controls together until
the symbol lights up and is
shown in the timer display.
Setting the programme
For a two-digit programme number
you need to first set the tens position.
Touch the sensor control re-
peatedly until the programme number
you want appears in the display, or
touch the appropriate number on the
numerical display.
Setting the code
Touch the sensor control re-
peatedly until the code number you
want appears in the display, or touch
the appropriate number on the nu-
merical display.
Saving the settings
While the programme is showing in
the display (e.g.:) touch the
sensor control until the indicators go
out.
To avoid saving the settings
Touch the sensor control until the
indicators go out.
Loading ...
Loading ...
Loading ...