Loading ...
Loading ...
Loading ...
6
Installation Clearances
The washing machine should NOT touch a wall or any adjacent furniture. For optimum operation,
we recommend making sure the clearances from the walls are as indicated in the figures below.
Safe and correct appliance operation cannot be ensured if the minimum required clearances are
not observed.
Connecting the Water Line
Attach one end of the water line hose to the back of the washing machine, and attach the other
end to the water tap. Screw the line all the way onto the thread.
• If your model has connections for both hot and cold water, then connect one hose to the cold
water supply (blue wing nut or blue mark on the hose) and the other one to the hot water
supply (red wing nut or red mark on the hose), as indicated on the back of the washing
machine. Connections are labelled with letters C and H (C = cold, H = hot). HOT water
(mixture of hot and cold water) is only added for programs at WARM or higher.
• If your washing machine features a hot and cold water connection, but only one water
temperature is desired for use, do not install the water hose. Close the hot/cold water
connection on the back of the washing machine with the supplied cap.
2" (50 mm)
Loading ...
Loading ...
Loading ...