Loading ...
Loading ...
Loading ...
17
Cleaning the Water Supply Hose, Detergent Dispenser, and Door Gasket
1. Unscrew the water intake hose,
and remove the water net filter.
Clean the filter with a toothbrush
under running water.
2. Replace the water net filter into the
water intake hose.
3. Clean the entire washing machine
rinsing section, using a brush,
especially the upper side of the
rinsing chamber.
4. Wipe the rubber door seal after
every wash to extend its usability.
Cleaning the Pump Filter
1. Open the pump filter cap using a
suitable tool, such as a flat head
screwdriver.
2. Remove the water outlet funnel
before cleaning the pump filter.
3. Slowly rotate the pump filter in a
counter-clockwise direction.
Remove the pump filter to allow
any water to slowly drain out of
the machine.
NOTE: It is recommended to place an
absorbent cloth on the floor in front of
the machine.
4. Clean the pump filter under
running water.
5. Replace the pump filter, turning it
clockwise to secure in the
machine. Cleaning the filter
gasket will ensure a good seal.
Loading ...
Loading ...
Loading ...