Loading ...
Loading ...
Loading ...
GENERAL POWER TOOL
SAFETY WARNINGS
_ ARN|NO: Some dust created by
power sanding, sawing, grinding,
drilli.g and other co.structio, activities
contains chemicals _ow. to the state
of Califor.ia to cause ca.cer, birth
defects or other reproductiwe harm.
Some examples of these chemicals are:
o Lead _om lead-based pai.ts;
o Crystalli.e silica from bricks a.d
ceme.t a.d other masonry products
and
o _senic and chromium from
chemically<reared lumber.
Your risk from these exposures varies,
depending on how often you do this
type of work. To reduce your exposure
to these chemical: work in a weU
ventilated area, and work with approved
safety equipment, such as those dust
masks that are specially designed to
filter out microscopic panicles.
READ ALL |NSTRUCT|ONS and safety
information very careful|y and make
sure you fully understand them before
attempting any operations with this too|.
|N[)I:NDED USI_:
YourWORX JAWSAW has been designed for
consumer use only. It is intended for pruning
branches and cutting small logs up to 4 inches
(100mm) in diameter.
NOMENCILATUER
a) Bucking -The process of cross cutting a
felled tree or log into lengths.
b) JawSaw power head- A JawSaw without
the saw chain and guide bar.
c) Drive Sprocket or Sprocket -The toothed
part that drives the saw chain.
d) Front Handle -The support handle located
at or toward the front of the JawSaw.
e) Guide Bar-A solid railed structure that
supports and guides the saw chain.
f) Normal Cutting Position -Those positions
assumed in performing the bucking and
delimbing cuts.
g) Oiler ControI-A system for oiling the
guide bar and saw chain.
h) Rear handle (push handle) -The support
handle located at the rear of the saw.
i) Replacement Saw Chain -A chain that
is the saw manufacturer's replacement
catalogue (or equivalent) number.
j) Saw Chain-A loop of chain having cutting
teeth, that cut the wood, and that is driven
by the motor and is supported by the
guide bar.
k) Trigger Switch -A device that when
operated will complete or interrupt an
electrical power circuit to the motor of the
JawSaw.
I) Switch Linkage-The mechanism that
transmits motion from a trigger to the
switch.
m) Lock out button -A movable stop that
prevents the unintentional operation of the
switch until manually actuated.
For JawSaw nomenclature, please refer to the
COMPONENT LIST.
_ ARNING: When using an electric
JawSaw, basic safety precautions
should always be followed to reduce the risk
of fire, electric shock, and injury to persons,
including the following:
FOR DOURLE-|NSULATED JAWSAWS
a) REPLACLcMENT PARTS
When servicing use only identical
replacement parts.
b) POLAR|ZED PLUGS
To reduce the risk of electric shock, this
equipment has a polarized plug (one blade
is wider than the other).This plug will fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. if it
still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the
plug in any way.
c) FOR ALL JAWSAW$
11) Keep work area cieaL
Cluttered areas invite injuries.
Do not start cutting until you have a clear
work area, secure footing, and a planned
retreat path from the falling limbs.
t_) Consider work area environment. Use
Loading ...
Loading ...
Loading ...