Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
If your saw does not operate correctly check the following:
PROBLEMS POSSIBLE CAUSES
oTool will not start.
o Bar / chain overheated.
Chain is loose.
* Poor cut quality.
o Unit runs but does not cut.
* Fuse blown or breaker
tripped.
* Extension cord notplugged
in.
* Chain too tight.
* Lubrication needed.
* Chain tension set incorrectly.
* Chain tension set incorrectly.
* Chain needs replacement.
* Chain installed backwards.
See Fig H and illustration.
POSS|BLE SOLUTION
* Check fuse or breaker.
oCheckto make sure
extension cord is plugged
into a working outlet.
o Refer to ADJUST|NG THE
CHA|N TENSION section.
o Refer to LUBRICATION
section.
o Refer to ADJUSTIN6 THE
CHAIN TENSION section.
Refer to ADJUSTING THE
CHAIN TENSION section.
Note: Excessive tension
leads to excessive wear and
reduction in life of bar &
chain.
* Refer to sections for
CHANGING THE GUIDE
BAR AND CHAIN.
Refer to CHANGING THE
GUIDE BAR AND CHAIN
section.
Loading ...
Loading ...
Loading ...