Loading ...
Loading ...
Loading ...
Warnings and safety instructions
9
In the event of a fault or for cleaning purposes, the tumble dryer is
only completely isolated from the electricity supply when:
- it is switched off at the wall socket and the plug is withdrawn, or
- it is switched off at the mains circuit breaker.
This tumble dryer must not be installed and operated in mobile
installations (e.g. on a ship).
Do not make any alterations to the tumble dryer, unless authorised
to do so by Miele.
This tumble dryer is supplied with a special lamp to cope with
particular conditions (e.g. temperature, moisture, chemical
resistance, abrasion resistance and vibration). This special lamp
must only be used for the purpose for which it is intended. It is not
suitable for room lighting. Replacement lamps may only be replaced
by a Miele authorised technician.
This tumble dryer uses a gaseous refrigerant which is condensed
by the compressor. Having been increased to a high temperature
level by compression, the refrigerant passes through a closed
refrigerant circuit. The heat generated is transferred to the drying air
as it passes through the heat exchanger.
- The humming noises caused by the heat pump during the drying
process are normal. They do not impair the correct functioning of
the dryer.
- The refrigerant is environmentally friendly and does not damage
the ozone layer.
Damage to the tumble dryer by switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer, wait for at least one hour before
starting a drying programme.
Loading ...
Loading ...
Loading ...