Loading ...
Loading ...
Loading ...
Programmable functions
83
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele App.
The message will appear in the time
display if an update is available.
You can install the update immediately
or postpone this until later. When the
tumble dryer is switched on again, you
will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install any updates.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the tumble dryer
during an update. Otherwise, the
update will be aborted and will not be
installed.
- Some software updates can only be
carried out by a Miele service
technician.
Switching on/Switching off
The RemoteUpdate function is
activated as standard. Available
updates will be downloaded
automatically but will only be installed if
you initiate the installation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Options
= Off
= On (factory default)
Starting the update
After the tumble dryer is switched on,
appears in the time display.
Touch the Start/Add laundrysensor.
starts to flash in the time display.
The update starts.
Bars in the time display show the
progress of the update:
= 0%
= 100%
Postponing the update
After the tumble dryer is switched on,
appears in the time display.
Touch the sensor.
The next time you switch on the
appliance, you will be prompted to start
the update again.
Loading ...
Loading ...
Loading ...