Loading ...
Loading ...
Loading ...
Operating the tumble dryer
19
Indicator lights
-
lights up when the condensed water
container needs to be emptied.
-
lights up when the plinth filter needs
to be cleaned.
- PerfectDry
The PerfectDry system measures the
residual moisture present in the
laundry in programmes with
selectable drying levels and provides
a more precise drying result.
The PerfectDry display
– will flash until the programme
running time has been determined,
and then go out.
– will light up again when the
selected drying level is reached
and remain on until the end of the
programme.
– does not light up at all with the
programmes Woollens handcare,
Warm air/DryFresh.
Gentletumble sensor
This should be selected for
temperature-sensitive textiles with the
symbol. When the sensor is touched,
Gentletumble lights up brightly.
With some programmes, Gentletumble
is always active (lights up) or inactive
(does not light up).
Time display
The remaining programme running time
is displayed in hours and minutes.
With most programmes, the duration
displayed may vary or "jump". The
following factors, among others, affect
the programme duration displayed: the
quantity of laundry, the type of fabric
and the residual moisture in the laundry.
The electronics will continually assess
the conditions and adjust the
programme duration with increasing
accuracy.
Sensor controls
-
After touching the sensor, a later
start time for the programme (Delay
start) can be selected. Once
selected, lights up brightly.
-
The and sensors are used for
selecting the duration of the Delay
start period or the duration of the
Warm air/DryFresh programme.
Start/Add laundry sensor
Touching the Start/Add laundrysensor
starts a programme. The current
programme can be interrupted to add
laundry. The programme can be started
when the sensor is flashing on and off.
The sensor lights up constantly once
the programme has started.
Loading ...
Loading ...
Loading ...