Loading ...
Loading ...
Loading ...
23
EN
PROBLEM POSSIBLE CAUSE WHAT TO DO
Motor starts but no ground
grind outlet
• No coee beans in bean
hopper.
• Grinder / bean hopper
is blocked.
• Coee bean may have
become stuck in hopper.
• Fill bean hopper with fresh
coee beans.
• Remove bean hopper.
Inspect bean hopper and
grinding burrs for blockage.
Replace parts and try again.
Motor starts but operates
with a loud ‘racket’ noise
• Grinder is blocked
with foreign item or chute is
blocked.
• Moisture clogging grinder.
• Remove bean hopper,
inspect burrs & remove
any foreign body.
• Clean the burrs and grind
outlet, see page 18.
• Leave burrs to dry
thoroughly before
re-assembling. It is possible
to use a hair dryer to blow air
into the burr area to quicken
the drying process.
Unable to lock bean hopper
into position
• Coee beans obstructing
bean hopper locking device.
• Remove bean hopper.
Clear coee beans from
top of burrs. Re-lock bean
hopper into position.
• Tamping fan was
removed for cleaning and
not replaced.
• Check that the tamping fan
is in position and mounted
correctly to the drive shaft,
page 18.
Emergency stop?
• Rotate the portalter to the
left to stop the auto grind,
dose & tamp function.
• Unplug power cord from
power outlet.
There is an alert on the LCD
eg. 'OVERHEAT PLEASE
WAIT', 'HEATING' etc.
• See page 15 for list of alerts.
If problem persists,
contact Sage
®
Customer
Service Centre or visit
www.sageappliances.com
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...