Mitsubishi WS-65908 OWNER'S GUIDE

Loading ...

Part II1: Setup

Menu: Convergence

Convergence

(Figure 1)

Your Mitsubishi TV has three picture tubes

which are aligned to properly converge the

projected light beams on the screen. Each

picture tube projects a single color of red,

blue or green. During production, your

TV was carefully adjusted to properly align

these colors. As a special feature, you have

the ability to adjust the red and blue light

beams in reference to the _ green I i_t

beam. This process is called convergence.

Convergence Menu

(Figure 2)

Convergence aligns the entire screen at

once. Select either Red Convergence or

Blue Convergence to begin alignment. To

align 64 individual points, see Advanced

Convergence, page 41.

Reset Factory Defaults

(Figure 2)

This allows you to reset the convergence to

the factory settings. The message "Conver-

gence completed" will be displayed when

the factory defaults have been restored.

Convergence Screen

(Figure 3)

When the Red and Blue crosshairs are prop-

erly converged, the center-screen crosshairs

will appear white. You can use A, v, <,

or I_ to move the Red and Blue crosshairs.

...........................Press VIDEO to switch between Red and

Blue. Press AUDIO for the Advanced Con-

vergence screen, and see Advanced Conver-

gence, page 41, for instructions.

Figure 1. Convergence selection in the Advanced menu

Figure 2. Convergence menu

Figure 3. Convergence screen

Loading ...

Mitsubishi WS-65908 Projection Television