Loading ...
Loading ...
Loading ...
Part I1: Installation
Connecting a Computer with a VGA Monitor Output
Connecting a Computer
(Figure 1)
[] Connect VGA Monitor Out from the com-
puter to VGA on the TV back panel
using a VGA compatible monitor cable.
See Appendix B, page 61, for VGA
signal compatability.
[] Connect the L (left) and R (right)
audio cables from the computer to VGA
AUDIO on the TV back panel. In cases
where your computer's audio output is a
single mini-RCA jack, a spliter is needed
to complete this connection.
[] To utilize the bene tsof a di_l _ A/V
receiver, connect your computer's digital
audio out, if available, to a digital input
on your digital A/V receiver.
TV back panel
I
r
Figure 1. Connecting a computer with a VGA monitor
output.
Connecting the System 4 Home Theater IR Control
(Figure 1)
[] Connect the IR emitter to IR EMITTER
HOME THEATER on the TV back panel.
[] Place the IR emitter cable under or
along the side of the A/V device. Place
the IR lens directly in front of the A/V
device's infrared signal receiver. Infra-
red signal receivers are usually behind
the front translucent panel of the device.
[] Place unused transmitters in an out-of-
the-way location.
[] For permanent installation of the IR
emitter cable, use the included adhesive
tape to secure the bottom of the emitter
to the anchoring object of your choice.
TV back panel
rv _ o_o
O_@ [] @ O
I_ GOOI_Q_ _ O _ _D
OO_I_
I OmerAN Device I _ AN Receiver
Figure 2. Connecting the System 4 Home Theater IR
Control.
Loading ...
Loading ...
Loading ...