Loading ...
Loading ...
Loading ...
Part I1: Installation
Back Panel
mm
@
®
®
B-
®®
®®
® ®®
® ®®
®
®®"
®
®
_R E_TTER HOME THEATER
®®®_
J
[] STB (Set-Top-Box)
This input can be used for the connection of any device with an S-Video output.
[] Inputs 1-3
These inputs can be used for the connection of a VCR, Super VHS (S-VHS) VCR, laser
disc player, or other A/V device to the TV. Please note that if you connect to the S-VIDEO
terminal, the VIDEO terminal is deactivated. The VIDEO terminal is active when there is
no S-Video connection.
[] Output (Monitor and PIP)
The Monitor Output sends the TV audio and video signals, excluding component video,
VGA, or DTV video, to an A/V receiver or other equipment. The PIP output sends the
PIP's or POP's audio signal to an ampli • or wiEI _s headphones. If noPI Por P(]? is
displayed, the PIP output will send the main picture audio signal.
[] Antenna (ANT-A, LOOP OUT, and ANT-B)
ANT-A and ANT-B receive signals from VHF/UHF antennas or a cable system. LOOP OUT
sends the ANT-A signal out to another component, such as a cable box or VCR.
[] IR Emitter Home Theater (System 4 Home Theater IR Control)
Connecting IR emitters here allow the TV to automaticallychange a digital A/V receiver's
input in a home theater setup, and pass IR commands to other A/V devices.
[] VGA
This input can be used for the connection of a computer. Please see Appendix B, page
61, for signal compatibility.
[] Component Inputs 1-2
These inputs can be used for the connection of A/V equipment with component video
outputs, such as a DVD player. Please see Appendix B, page 61, for signal compatibility.
[] DTV Input
This input is used to connect a DTV receiver, and can be con _r ed far I-DTV corrp orient,
RGB sync on green, and RGB plus H&V. Please see Appendix B, page 61, for signal
compatibility.
Loading ...
Loading ...
Loading ...