Loading ...
Loading ...
Loading ...
Part I1: Installation
Connecting a VCR
v bac< p_r
o÷el®_[] o ® e ®1_
_e_l®_ [] o ®e ®E
Antennas or Wall Outlet Cable
(Figure 1)
[] Connect the incoming cable to ANT-A on
the TV back panel.
[] Connect two coaxial cables as follows:
[] One from LOOP-OUT on the TV back panel to
ANTENNA IN on the VCR back panel.
[] One from VCR back panel ANTENNA OUT to
ANT-B on the TV back panel.
[] Now complete gJre3, st_ps 1-2
Figure I. Connecting VCR with antennas or wall outlet
cable.
Cable Box
(Figure 2)
[] Connect the incoming cable to ANT-A on
the TV back panel.
[] Connect three coaxial cables as follows:
[] One from LOOP-OUT on the TV back panel to
IN on the back of the cable box.
[] One from OUT on the back of the cable box to
ANTENNA IN on the VCR back panel.
[] One from ANTENNA OUT on the VCR back
panel to ANT-B on the TV back panel.
[] Now complete gJre3, st_ps 1-2
Composite Video with Audio or
S-Video with Audio
(Figure 3)
Figure 2. Connecting VCR with cable box.
TV b,_k panel
[] Connect a video cable from VIDEO
OUT on the VCR back panel to VIDEO
INPUT-l, INPUT-2 or INPUT-3 on the TV
back panel.
[] If you have a S-VHS VCR, follow the same
steps using the S-Video terminals on the VCR
and TV (in place of the composite terminals).
[] Connect a set of audio cables from
AUDIO OUT on the VCR back panel to
AUDIO INPUT-l, INPUT-2, or INPUT-3
on the TV back panel. The red cable
connects to the R (right) channel and
the white cable connects to the L (left)
channel. If your VCR is mono (non-ste-
reo), connect only the white (left) cable.
Figure 3. Connecting the VCR Audio/Video.
Loading ...
Loading ...
Loading ...