Loading ...
Loading ...
Loading ...
Part II1: Setup
Programming the Remote Control:
To Activate the System 4 Home Theater IR Control
Activation of the System 4 Home
Theater IR Control
For select brands of digital A/V receiver's,
you can set up the remote control to auto-
matically select the correct audio input when
you press the HOME THEATER button. At
the same time, the TV will select the correct
5 video input. This allows you to watch your
best type of video (Component, S-Video)
with your best type of audio (Dolby Digital,
Pro Logic, etc.) conveniently. See System
4 Home Theater IR Control, page 22, for
connection instructions.
III
Once properly activated, when the HOME
THEATER button is pressed, System 4 Oper-
ates In 2 Parts:
Changes a compatible digital A/V
receiver to the correct input for the device
you wish to operate.
Changes the TV to the correct input
for the device you wish to operate.
Both functions can operate simultaneouslywithonetouche,theHOMETHEATER
button. However, you may activate only one
if you desire (video to control the TV or
audio to control the A/V Receiver). The
remote control must be programmed to the
appropriate A/V Receiver code prior to the
activation of the audio portion (see To Pro-
gram the Remote to Control Other Brands of
Audio and Video Products, page 26).
To Activate the Audio Portion:
(Figure 1)
[] Press and hold the HOME THEATER
button.
[] Press and release the AUDIO button.
[] Name the TV input as instructed.
HOME
_111" ll . IO Ill i# O A . • it
Device You Are Using Name Input
Cable Box connec_ _aANTRA or ANT-B Cannot be namec
Cable Box connec_ _aSTB CABLE
Sa_llie Receiver connected tD any input DBS
Diqi_l TV/Sal_Ili_ Receiver connec_d _ DTV Cannotbe namec
VCR connec_d "_ input 1, 2 3, or 4 VCR
DVD connec_d "_ any inp_but DTV DVD
Figure I. Activating the audio portion of System 4 for the
CABLE/DBS/DTV laye_
To Activate the Video Portion:
[] Press and hold the HOME THEATER
button.
[] Press and release the VIDEO button.
Loading ...
Loading ...
Loading ...