Loading ...
Loading ...
Loading ...
17
REM OTE CONTROL OPERATION
For remot e to function make sure the heater is plugged in and main power sw itch located on the
bot tom left hand side is at position I.
When operating the remot e make sure you point the remote to the cent re of the fireplace and make
sure each time you press the but ton the buzzer inside the unit will beep once. It takes some time for
the receiver to respond to the transmit ter. Do not PRESS the but tons more than once within two
seconds for correct operation.
Power on butt on: The power-on but ton at top left corner of the remot e is the main ON/ OFF
pow er but ton. This will turn off all the functions and the fireplace will be in st andby mode.
DISPLAY ON/ OFF button: Sw itching the fireplace flame and tray light ON/ OFF. It has functions of
sett ing memory.
DISPLAY BLUE button: Adjust the blue color brightness of flame and tray.
DISPLAY YELLOW button: Adjust the yellow color brightness of flame and tray.
DISPLAY ORANGE button: Adjust the orange color bright ness of flame and tray.
M OOD LIGHT ON/ OFF button: Sw itching the mood light ON/ OFF.
ADJUST button: Swit ching the color of the mood light.
FLASH button: Swit ches the mood light into flash mode, this cycles through all mood light colors.
HEATER ON/ OFF button: Sw itching the heat er ON/ OFF. It has functions of setting memory.
HIGHT button: Press the high butt on to swit ch the heat er to high heat sett ing 1500W.
LOW button: Press the low but ton to sw itch the heater to low heat sett ing 750W.
TEM P. button: Press the TEM P. but ton mult iple times to set ambient temperat ure at
Whensettingthetemperature,thenumberwillash.
18℃(64.4℉),
19℃
(
66.2℉
)
, 20℃
(
68℉
)
,
21℃
(
69.8℉
)
,
22℃(71.6
℉), 23℃(73.4℉), 24℃(75.2℉),
25℃(77℉),
26℃(78.8℉), 27℃(80.6℉),
28℃(82.4
℉
).
Loading ...
Loading ...
Loading ...