Loading ...
Loading ...
Loading ...
13
INSTALLATION- BUILT-IN
1. Select a location that is not prone to
moisture and is located at least 0.91m or 3
feet away from combustible mat erials such
as curtains or drapes, furnit ure, bedding,
paper, et c.
2. M ark the desired location on the floor and
store appliance in a safe, dry and dust free
location.
3. Prepare a wall with a framed opening to
accommodat e the size of your unit. Leave at
least 1/ 4 ” (6 mm) around the edge of the
appliance. Any new wiring must be done in
compliance with local and national codes
and other applicable regulat ions.
Note: Fireplace must st ick out of the wall a
minimum of 1/ 2 ” or 1.5 cm.
Prior to installing the appliance, test to make
sure the appliance operates properly by
plugging the power supply cord into a
conveniently located 120 Volt grounded
outlet.
The rough wall opening size of the fireplace:
W(“) D(“) H(“)
WM -FM L-26-3223-STL
27 6 1/ 2 20 1/ 2
WM -FM L-34-4023-STL
35 6 1/ 2 20 1/ 2
WM -FM L-48-5523-STL
49 6 1/ 2 20 1/ 2
WM -FM L-60-6623-STL
60 5/ 8 6 1/ 2 20 1/ 2
WM -FM L-72-7823-STL
72 1/ 2 6 1/ 2 20 1/ 2
WM -FM L-88-9623-STL
89 1/ 2 6 1/ 2 20 1/ 2
1. Take the front panel off from the unit. Put the
brackets on the both sides and top of the fireplace
as shown blew.
2. Lift fireplace and insert into opening.
3. M ake sure that the power supply port is not
behind the wall.
4. Level the fireplace.
5. Drive mount ing screws into the mounting
brackets on the unit and the wall st uds.
6 Replace the front panel and plug in back-.
-lighting LED. See page 11.
Loading ...
Loading ...
Loading ...