Loading ...
Loading ...
Loading ...
mounting the scroll saw to
1, When mounting this saw to a workbench a so,lid wood
bench is preferred over a plywood bench where noise and
vibration wilt be more noticeable.
2, Hardware to mount this saw to a workbench is NOT
supplied with the saw. However, we recommend the hard-
ware used be no smaller than the following,
Quantity Description
4 Hex Head Screws, _/_-20x Length Required
4 Flat Washers, %2 I,D.
4 Lockwashers. %2 I.D.
8 Hex Nuts, _/_-20
3, A soft foam pad to place between your scroll saw and work-
bench is NOT supplied with the saw. However, we highly
recommend the use of such a pad to reduce noise and
vibration.
Quantity
1
Description
Soft foam pad such as carpet padding,
24" x 12" x _/_"
a bench
4. Example of mounting this scrol! saw to workbench.
SCROLL SAW BASE
!
T
_" Foam Pad (optional)
WORKBENCH
Do NOT overtighten mounting bolts--leave some cushion in
the foam pad for absorbing noise and vibration,
\
LOCKWASHER
HEX NUT
IAM NUT
HEAD SCREW
4, If you prefer to mount your saw to a leg set we recommend
the leg set for bench top tools which is available through
Sears Retail or Catalog Stores. The number of this leg set
is 9-22244, This leg set is an optionat accessory and
instructions to mount the scroll saw to this leg set are
included in the leg set package,
11
Loading ...
Loading ...
Loading ...