Loading ...
Loading ...
Loading ...
29ENGLISH
Energy saving tips
We recommend that you follow the tips
below to save energy.
• Freezer: The internal conguration of
the appliance is the one that ensures
the most ecient use of energy.
• Fridge: Most ecient use of energy
is ensured in the conguration with
the drawers in the bottom part of
the appliance and shelves evenly
distributed. Position of the door bins
does not aect energy consumption.
• Do not open the door frequently or
leave it open longer than necessary.
• Freezer: The colder the temperature
setting, the higher the energy
consumption.
• Fridge: Do not set too high temperature
to save energy unless it is required by
the characteristics of the food.
• If the ambient temperature is high
and the temperature control is set to
low temperature and the appliance
is fully loaded, the compressor may
run continuously, causing frost or ice
formation on the evaporator. In this
case, set the temperature control
toward higher temperature to allow
automatic defrosting and to save
energy this way.
• Ensure a good ventilation. Do not
cover the ventilation grilles or holes.
Hints for fresh food
refrigeration
• Fresh food compartment is the one
marked (on the rating plate) with
.
• Good temperature setting that
ensures preservation of fresh food is a
temperature less than or equal to +4°C.
• Higher temperature setting inside the
appliance may lead to shorter shelf
life of food.
• Cover the food with packaging to
preserve its freshness and aroma.
• Always use closed containers for
liquids and for food, to avoid avours
or odours in the compartment.
• To avoid the cross-contamination
between cooked and raw food, cover
the cooked food and separate it from
the raw one.
• It is recommended to defrost the food
inside the fridge.
• Do not insert hot food inside the
appliance. Make sure it has cooled
down at room temperature before
inserting it.
• To prevent food waste the new stock
of food should always be placed
behind the old one.
13. HELPFUL HINTS AND TIPS
12.6 To tting the door seal
1. Take the new gasket, the best way
to t it is starting at the top corners
of the refrigerator door. Push the lip
of the new gasket into the channel
between corners and work your
way around the door. Before tting
the bottom corners and t between.
Lastly work evenly at the top then the
bottom to the middle helping spread
any excess evenly on the longest
part of the se al.
2. Apply powder. Use a bit of baby
powder or talcum powder to prevent
sticking.
3. Close the refrigerator door, and open
it several times to inspect the gasket.
You are looking for any warped areas
of the gasket. Repeat this process
several times
Loading ...
Loading ...
Loading ...