User Manual - Page 27

For RMB954F9VX. Also, The document are for others AEG models: RME954F9VX

Loading ...
Loading ...
Loading ...
27ENGLISH
4. Lift o󰘯 the top hinge cover.
5. Disconnect electrical harness running
from door to hinge cover.
6. Pull up on water line gently to remove
from door.
NOTE
Use care while pulling the water
tube from the door to be sure
that tube does not kink.
Waterline
NOTE
Approximately four feet of water
tube will be pulled from the
refrigerator door.
7. Remove three 8mm bolts from both
top hinges.
[
8. To gain access to lower hinge,
drawer will need to be extended.
Unscrew the three lower hinge
screws and slide the hinge inwards
Lift up on door and remove from
bottom hinge.
Lower Hinge Removal
CAUTION
Be sure doors are set aside in
a secure position where they
cannot fall and cause personal
injury, or damage to the doors
or handles.
9. To reinstall doors, reverse procedure.
IMPORTANT
Make sure water line tubing
goes through hole at top of
dispenser pocket. There is also
a metal wrap on the tubing to
prevent damage from the hinge
rubbing against it. This needs
to be 󰘰xed back around the
tube in the proper location upon
reinstallation (just as long as the
tube is protected from the hinge).
Loading ...
Loading ...
Loading ...