Loading ...
Loading ...
Loading ...
14
WWW.VINOTEMP.COM
!
!
Door Handles
Assembly instructions of cold storage door handle:
1. Firstly, take the handle set bolts out from the
refrigerator, use cross recessed screwdriver to set the bolt
on the door. Fix it tight with all the screw thread twisted
through the hole, as shown in the figure.
2. After the first step is completed, take the cold
storage door handle out from the box, place it as per the
direction shown in the figure (Note: i.e. the direction which
both screw holes on the handle are close to the edge), and
hang the handle above the set bolt.
3. Use the small hexagon spanner supplied in the box
to set the handle fixing socket head cap screws into both
the small screwed holes on the handle. After they are
screwed down, gently shake the handle, so as to confirm
that the handle is well erected.
Assembly instructions of the refrigerator door handle:
The assembly steps of the refrigeration door handle are
the same with that of the cold storage door handle. Please
note that: during the assembly of the handle, the direction
of tapping hole is downward (to the ground).
Loading ...
Loading ...
Loading ...