Loading ...
Loading ...
Loading ...
13
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
Take out, clean and install the ice cube box
If the ice maker isn't used for a long period, ice cubes that are
just produced might have unpleasant smell. You must take
out and clean the ice cube box.
Open the upper drawer in the freezer compartment, rotate the
knob of ice maker counterclockwise by 90, turn the handle
from the horizontal position to vertical position to release the
lock (as shown in Fig. 1 of Pg. 14), pull it out (as shown in
Fig. 2 of Pg. 14) and take out the ice cube box.
Rinse the ice cube box with warm water (below 60℃) and
don't use detergent.
Dry the ice cube box completely in air in case that water
droplets in the ice cube box might cause abnormal functioning
of the ice maker.
When the ice maker can't move, separate the ice maker as
shown in Fig. 1 and Fig.2. Then install after ice cubes are
melted.
Insert the ice cube box onto the rack according to original
sequence and rotate to the locked position.
Take out and install the ice maker
When the ice maker isn't used, it could be
taken out and the vacated space could be
used as a part of the freezer compartment.
Push the Ice Maker button on the control
panel at the refrigerator door and the
icemaking sign disappears.
Open the door and take out the drawer.
Pull the ice-maker out (as shown in Fig.1),
and then downwards, so that the ice maker
is unhooked (as shown in Fig. 2).
Pull down the ice maker's power plug so that it is detached from the ice-maker's power socket
(as shown in Fig. 3)
Install the ice maker into the original position, push the Ice Maker button, the ice-making symbol
appears.
Close the door after the ice maker is installed to the proper place, otherwise, it might damage
the ice maker.
Loading ...
Loading ...
Loading ...