WWW.VINOTEMP.COM
A PROUD HERITAGE OF EXPERIENCE & QUALITY
OWNER’S MANUAL
REFRIGERATOR
HC- 767WE ( BR- FDREF01- S S )
2
WWW.VINOTEMP.COM
!
!
GENERAL OPERATING INSTRUCTIONS
Remove all external and internal packaging from your appliance. Be sure that all parts
have been included before discarding any packaging materials. You may want to keep
the box and packing materials for use at a later date.
Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged.
Let the unit rest UNPLUGGED for 24 hours once you have it placed in your home.
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
-Save these instructions-
To register your product, visit: http://www.vinotemp.com
Register your warranty within 10 days of receiving the unit.
Please be sure to retain your proof of purchase.
Protect Your Investment with an Extended Warranty!
Add a New Leaf extended warranty to your order, and have the security of knowing that if there should be a problem, even
years in the future, New Leaf will be there to assist! Usable for any Wine Cellar or other electronic device manufactured by
Vinotemp. Add this warranty to purchases made from vinotemp.com or other qualified venders. Warranty must be
registered within the first 10 days from original purchase.
Visit www.vinotemp.com to purchase.
3
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
Table of Contents
Important Safety Instructions ------------------------ 4
Electrical Connection ---------------------------------- 5
Specifications ------------------------------------------- 6
Product Description ---------------------------------- 6-7
Installation ----------------------------------------------- 8
Start Using Your Refrigerator ------------------ 9-13
Door Handles ----------------------------------------- 14
Minor Adjustment Between Doors --------------- 15
Operation ------------------------------------------- 16-18
Cleaning and Maintenance ------------------------ 19
Maintenance and Troubleshooting ---------------- 20
Terms & Conditions ------------------------------ 21-26
Warranty ------------------------------------------------- 28
Note:
The refrigerator you have just purchased may be slightly different from the one shown in the drawings in this manual,
but its overall design is the same.
Please read the information referring to its operation. This refrigerator is intended for domestic use only.
The plug on the refrigerator you have purchased may be different from the one shown in the manual, as the plug that
accompanies the product meets your country's electrical specifications.
4
WWW.VINOTEMP.COM
!
!
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock or injury when using your appliance,
follow these basic precautions:
Read these instructions carefully before using your refrigerator, and keep it carefully.
If you follow the instructions, your refrigerator will provide you with many years of good service.
For Children
• Please keep children from entering or climbing the refrigerator to avoid locking the children
inside the refrigerator and hurting them when the refrigerator falls.
• Do not let the children near the refrigerator when open and close the doors.
• Children should be supervised to ensure that they do not play with the appliance.
For the User
• This appliance must be grounded. Connect only to grounded outlet. See “ELECTRICAL
CONNECTION” on page 5.
• Install or locate this appliance only in accordance with the provided installation instructions.
• Use this appliance only for its intended use as described in the manual. This product is a
household refrigerator and is only suitable for storage of food according to state standards.
It can't be used for other purposes, like storage of blood, drugs, biological products and etc.
• Never pull out the plug by pulling the power cable. Always hold the plug and pull it out from
the socket. Don't have the power cable pressed under the refrigerator or feet. When the
refrigerator is moved away from the wall, never press or damage the power cable. When
the power cable is damaged or the plug is worn, don't use it anymore. When the power
cable is worn or damaged, you must change it at the repair station designated by the
manufacturer.
• When coal gas or other inflammable gases are leaked, close the valve for leaking gases.
Open the door and windows. Don't pull out or insert the plug of refrigerator or other electric
appliances.
• Don't put inflammable, explosive, volatile or strongly corrosive substances into the
refrigerator to avoid damaging the refrigerator or starting fire or other accidents.
• Don't use inflammable solvent near the refrigerator to avoid fire.
• It is advisable that you don't put the power socket, voltage stabilizer, microwave oven and
other electric appliances on top of refrigerator to ensure safety. Don't use any electric
appliances inside the refrigerator (except for the model recommended) to avoid interference
or other accidents.
• When the refrigerator starts to work, don't touch the cold surface of the freezer
compartment, especially with wet hands, to avoid hurting.
• The gap between doors and between the door and refrigerator body is small. Don't put your
hands into these areas to avoid finger squeeze. When you open the refrigerator's door,
don't let children approach.
• Don't sprinkle water onto the refrigerator. Rinse the surface of the refrigerator with water.
• Don’t put the refrigerator in wet or easy-to-sprinkle places so as not to influence the electric
insulation property of the refrigerator.
• Don't disassemble or reform the refrigerator by yourself. Never damage the refrigeration
pipeline. Please get the refrigerator repaired by professionals.
• Don't put fluid substances in bottles or sealed containers into the freezer, like bottled beer
or drinks to avoid that the explosive cracking during freezing causes other losses.
• When power outage or cleaning, pull out the plug. Turn on the power supply after at least
five minutes to avoid that repeated startup might damage the compressor.
5
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
• As with any appliance, close supervision is necessary when used by children.
• Keep cord away from heated surface.
• Do not operate this appliance if it has a damaged cord or plug, if it is not working properly,
or if it has been damaged or dropped.
• When the refrigerator is out of service, please take down the refrigerator's door, remove the
door seal and shelves and put them at proper places to avoid that children might play inside
and cause accident.
• This appliance should be serviced only by qualified service personnel. Contact nearest
authorized service facility for examination, repair, or adjustment.
ELECTRICAL CONNECTION
Improper use of the grounded plug can result in the risk of electric shocks. If the
power cord is damaged, frayed or shows cracks or abrasions across its length,
have it replaced at an authorized service center.
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. This appliance is
equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded.
For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong
grounding-type plug, and should be used in combination with a properly connected grounding-
type outlet.
• Do not under any circumstances cut or remove the third ground prong from the power cord
supplied. For personal safety, this appliance must be properly grounded.
• Do not kink or pinch the power supply cord of appliance.
• The cord should be secured behind the unit and not left exposed or dangling to prevent
accidental injury.
• A standard electrical supply (115V AC only, 60Hz, 15A), properly grounded in accordance
with the National Electrical Code and local codes and ordinances, is required.
• Never unplug the unit by pulling the power cord. To disconnect the appliance, always grip
the plug firmly and pull straight out from the wall outlet. When moving the unit, be careful
not to damage the power cord.
• The unit should always be plugged into its own individual electrical outlet with a voltage
rating that matches the rating label on the unit.
Extension Cord
CAUTION: It is strongly recommended that you do not use an
adapter or an extension cord with this unit.
6
WWW.VINOTEMP.COM
!
!
SPECIFICATIONS
PRODUCT DESCRIPTION
1) Display
2) Left door for refrigerator compartment
3) Upper door for freezer compartment
4) Lower door for freezer compartment
5) Door handle
6) Right door for refrigerator compartment
7) Drawer handle
8) Ice storage box
9) Ice scoop
10) Partition plate for lower freezer drawer
11) Partition plate for upper freezer drawer
12) Upper freezer drawer
13) Lower freezer drawer
Model
HC-767WE (BR-FDREF01-SS)
Voltage
AC 115V
Frequency
60Hz
Ambient Temp Range
53.6-109.4°F (12-43℃)
Control Temp Range
41-64.4°F (5-18℃)
Refrigerant
R134a, 6.35Oz
Power Consumption
623 kW•h/y
Rated Defrost Power (W)
370W
Volume
585L
Net Weight
293.2lbs (133kg)
Gross Weight
317.5lbs (144kg)
Dimensions (W x D x H)
35.87 x 28.68 x 69.88 in
Box Dimensions (W x D x H)
38.78 x 30.71 x 72.4 in
7
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
PRODUCT DESCRIPTION (PART II)
1) Left door for refrigerator compartment
2) Cantilever rack
3) Turnover beam
4) Sliding cantilever rack
5) Fruit and vegetable drawer
6) Small drawer
7) Big drawer
8) Automatic ice maker
9) Drawer handle
10) Leveling leg
11) Switch for refrigerator compartment lamp
12) Top lamp for refrigerator compartment
13) Right door for refrigerator compartment
14) Butter box
15) Air duct cover plate
16) Folded cantilever rack
17) Side lamp for refrigerator compartment
18) Gallon bottle rack (With egg bracket)
19) Special-shaped bottle rack
20) Top lamp for freezer compartment
21) Upper door for freezer compartment
22) Lower door for freezer compartment
23) Decorative cover for bottom beam
8
WWW.VINOTEMP.COM
!
!
INSTALLATION
Remove all packaging material before using the new refrigerator. This includes the foam base and
all adhesive tape holding the refrigerator accessories inside and outside.
Clean both the inside and outside of the refrigerator with wet cloth (a little detergent could be added
into the warm water to wash the cloth and then wipe it again with the clean water).
Prepare an independent two-pole socket with grounding contact for the refrigerator and it shall not
share a multi-purpose socket with other electrical appliances.
Do connect grounding wire! The grounding pole of the
socket shall be provided with a reliable grounding wire.
Open the refrigerator body and take out the accessory
(decorative cover for bottom beam) and the three screws
from the instruction packaging bag. Next, install them into
the bottom beam as shown by the schematic diagram on
the right.
The decorative cover for bottom beam is used as
ornament, so you can choose not to install it. It won't
affect the refrigerator's performance or conditions no
matter whether you install it or not.
Transport and placing of your refrigerator
Transport
Keep upright and avoid squeezing or vibration during transport. Avoid a slant angle over 45 degree
during handling.
Avoid the door or top cap from being under excessive stress when moving; otherwise, it may
become deformed.
Placing
Place your refrigerator in a well-ventilated place
and keep it from heat source and direct sunlight.
Don't place it in any humid or wet place so as to
avoid rust and weakening of insulation effect.
There shall be a space not less than 30cm from
the top of your refrigerator and not less than 10cm
from both sides or the back of the refrigerator to
the adjacent walls respectively. This requirement
is good for open and close of the door and also for
heat emission.
The refrigerator shall be placed on a flat and firm
ground (if not flat, you can use the leveling legs for
adjustment).
Keep your refrigerator standing
Don't connect your refrigerator to the power supply
immediately after it is placed vertically. You should
keep it standing for at least 6 hours before switching it on in order to ensure it running well.
Make sure the power wire is not pinned by the refrigerator or other objects so as to avoid accidents
arising from power wire faults. Please check the voltage scope of your refrigerator against the actual
power supply before switching it on.
Note:
The refrigerator must be disconnected from the
source of electrical supply before attempting the
installation of accessory.
Don't use mechanical equipment or other methods
to accelerate the defrosting process except the
means recommended by the manufacturer.
Don't use any electrical appliances in the food
storage compartments except the model
recommended by the manufacture.
The R134a refrigerant and cyclopentane foaming
material used in the refrigerator are inflammable.
All waste and discarded refrigerators shall be
placed away from naked fire and they are not
allowed to burn.
Warm Reminder: place foods into the drawer. Do
not place any foods after removing the drawer.
9
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
Start Using Your Refrigerator
You ought to get a good knowledge of all safety precautions and make sure that your
refrigerator has been placed properly in its final position before using.
1. Unpacking
Please install the decorative cover for bottom beam onto your refrigerator after unpacking and
adjust the front leveling legs to level your refrigerator.
2. Connecting Your Refrigerator to the Power Supply
Your refrigerator will enter the ex-factory default state after connecting to the power supply and
it will display target temperature for the refrigerator compartment and freezer compartment.
3. Work Modes of Your Refrigerator
You can set your refrigerator in either of the following two ways:
Auto mode: we suggest you choosing this mode if you have no special requirements.
Your refrigerator will work automatically after you chose this mode.
Manual mode: You can set the temperature by pressing the temperature adjustment key.
4. Put Food into Your Refrigerator
You can put your food into the refrigerator after a period of time (About hours in summer) when
the refrigerator has already fully refrigerated its interior compartments.
Tips: The interior temperature may require a certain period of time to reach balance if the setting temperature is
changed or other food is put into the refrigerator. Such a period of time depends on the change to the setting
temperature, the surrounding temperature, opening frequency, the amount of the stored food and etc.
Refrigerator compartment
Though the temperature-adjustable device could keep most of the refrigerator compartment at
an average temperature around 1℃~7℃, it fails to preserve the freshness of food for long. As a
result, the refrigerator compartment can be used only for short-term storage.
Use of turnover beam
Please keep strictly to the warnings on the label of the
turnover beam. It is a normal phenomenon that the
surface of the turnover beam is hot. Dews on the
surface are also normal in summer or when the
surrounding environment is wet. What you need to do is
to clean them away with cloth.
Adjustment of cantilever rack
The cantilever rack could be adjusted to the proper
height as required by food. Please adjust the cantilever
rack by following the arrows as shown in the diagram.
Raise it upward first and then take it out by tilting it
upward. During installation, put the upper end of the
fixed leg into one of the upper slots on the supporting
iron first and then put the lower end of the fixed leg into
the third slot on the lower part of the supporting iron.
10
WWW.VINOTEMP.COM
!
!
Height adjustment and cleaning of
door-mounted bottle rack
Raise the bottle rack in the direction, hold it with both
hands and take it out in the direction. After cleaning,
you can install the rack in the reverse order and you
can also adjust the height of the rack.
Food suggested to store in refrigerator compartment
1. Cooked wheaten food, cans, milk, etc.
2. Snack food, food subject to tainting, dairy product
3. Cooked cold meat, sausage
4. Fruit, vegetables
5. Eggs, butter, cheese
6. Cans, seasoning
7. Drinks, other bottled food
Freezer compartment
The temperature in the freezer compartment is very low so it could preserve the freshness of
food for long. Those that shall be stored for long could be put in this compartment but not
exceed the storage period specified on the packaging of each kind of food.
You can take out the drawers of the freezer compartment to increase its capacity and store
more food.
Food suggested to store in freezer compartment
1. The upper drawer of the freezer could be used to store fish, meat, ice-cream and etc.
2. Ice storage box is used to store the ice.
3. The lower drawer of the freezer is used to store fish, meat and packaged poultry meat.
11
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
Taking-out and installation of the lower freezer drawer
12
WWW.VINOTEMP.COM
!
!
Big drawer
The big drawer has a maximum load of 10kg.
Ice-maker
Pull out and install the big drawer
1. Pull out the big drawer.
2. Find the hook at the left and right sides
at the drawer bottom (shown in the figure).
3. Hold the hook at two sides with a nose
pliers or tweezers and push it up and out of the
groove of sliding rail, and take out the hook at
the other side with the same method.
4. Take out the drawer.
5. Install the drawer by putting the hook
into the right place.
Operating instructions on the ice-maker
1. When the refrigerator is used for the
first time, start the ice-maker after 20min. The
ice-maker is capable of producing 1.3~1.5Kg
ice in 24hr, depending on the temperature of
freezer compartment, surrounding
temperature, times of door opening/closing
and other working conditions.
2. If the ice-maker isn't used for a long
period, please close the ice-maker at the
control panel of the Refrigerator door, clear the
ice cube box and ice storage box.
3. When the ice marker starts again after
a long period of power off, please ensure that
ice cubes are not melted. Otherwise, please
clear the ice cube box and ice storage box.
4. Check the level of water tank from time
to time (if the level of water tank is too low, ice
cubes will be smaller).
5. The ice-maker checks the ice amount
automatically and stop ice-making when the
ice storage box is full.
6. You will hear the sound of motor after
about two hours, which is the sound of pump
providing water to the ice maker and doesn't
indicate malfunctioning.
7. It is normal that several ice cubes may
stick together or get crushed.
8. When the refrigerator is used for the
first time, the ice maker starts to work after the
freezer compartment is cooling for about three
hours (maybe longer when there is much food
stored). The ice-maker could produce about
1.3kg ice cubes within 24 hours, which may
vary depending on the temperature of freezer
compartment, surrounding temperature, times
of door opening/closing and other working
conditions.
9. The ice-maker is capable of automatic
water supply, ice-making and ice-removal.
Please don't take out the ice cube box and add
water by yourself.
Note: If you did not use the fridge for a long
time, you need to get the water out of the ice-
maker when using again and clean the ice-
maker to make sure the ice is pure.
13
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
Take out, clean and install the ice cube box
If the ice maker isn't used for a long period, ice cubes that are
just produced might have unpleasant smell. You must take
out and clean the ice cube box.
Open the upper drawer in the freezer compartment, rotate the
knob of ice maker counterclockwise by 90, turn the handle
from the horizontal position to vertical position to release the
lock (as shown in Fig. 1 of Pg. 14), pull it out (as shown in
Fig. 2 of Pg. 14) and take out the ice cube box.
Rinse the ice cube box with warm water (below 60℃) and
don't use detergent.
Dry the ice cube box completely in air in case that water
droplets in the ice cube box might cause abnormal functioning
of the ice maker.
When the ice maker can't move, separate the ice maker as
shown in Fig. 1 and Fig.2. Then install after ice cubes are
melted.
Insert the ice cube box onto the rack according to original
sequence and rotate to the locked position.
Take out and install the ice maker
When the ice maker isn't used, it could be
taken out and the vacated space could be
used as a part of the freezer compartment.
Push the Ice Maker button on the control
panel at the refrigerator door and the
icemaking sign disappears.
Open the door and take out the drawer.
Pull the ice-maker out (as shown in Fig.1),
and then downwards, so that the ice maker
is unhooked (as shown in Fig. 2).
Pull down the ice maker's power plug so that it is detached from the ice-maker's power socket
(as shown in Fig. 3)
Install the ice maker into the original position, push the Ice Maker button, the ice-making symbol
appears.
Close the door after the ice maker is installed to the proper place, otherwise, it might damage
the ice maker.
14
WWW.VINOTEMP.COM
!
!
Door Handles
Assembly instructions of cold storage door handle:
1. Firstly, take the handle set bolts out from the
refrigerator, use cross recessed screwdriver to set the bolt
on the door. Fix it tight with all the screw thread twisted
through the hole, as shown in the figure.
2. After the first step is completed, take the cold
storage door handle out from the box, place it as per the
direction shown in the figure (Note: i.e. the direction which
both screw holes on the handle are close to the edge), and
hang the handle above the set bolt.
3. Use the small hexagon spanner supplied in the box
to set the handle fixing socket head cap screws into both
the small screwed holes on the handle. After they are
screwed down, gently shake the handle, so as to confirm
that the handle is well erected.
Assembly instructions of the refrigerator door handle:
The assembly steps of the refrigeration door handle are
the same with that of the cold storage door handle. Please
note that: during the assembly of the handle, the direction
of tapping hole is downward (to the ground).
15
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
Making minor adjustments between doors
Remember a level refrigerator is necessary for getting the doors perfectly even. If you need
help, review the previous section on leveling the refrigerator.
Make adjustment only when the left door is lower than the right door, or the right door is lower
than the left door.
Do as follows:
1. Raise the left door or the right door.
2. Insert the supplied fastener-ring (2) using a pair of pliers (3) in the gap between the
hinge-grommet (1) and the lower hinge (4). The number of fasten-rings you will need to insert
depends on the gap.
Installing the water line (optional)
Installing the water line
1. The water pressure must be between. 0.17MPa
(1.72 bar, 24.95 PSI) and 0.82 MPa (8.25 bar, 119.66 PSI).
2. Please take off the cover of water adapter, and then
use spanner to fix the water adapter to the water tap tightly.
3. Turn on the water tap slowly, as to check whether
there is water leakage from the connection of water adapter.
4. It is recommended to scrap first round 5 kilograms
ice before consumed.
16
WWW.VINOTEMP.COM
!
!
OPERATION
Control buttons
1) Refrigerator temperature control
2) Freezer temperature control
3) Energy saving mode
4) Auto mode
5) Ice-making switch
6) Child lock
Display items
7) Fast-cooling icon
8) Fast-freezing icon
9) Energy saving icon
10) Auto icon
11) Ice-making icon
12) Lock icon
13) Refrigerator compartment icon
14) Freezer compartment icon
15) Refrigerator indicator
16) Freezer indicator
17) Off icon
18) Refrigerator temperature
19) Freezer temperature
Initial power-on status:
All on
Locking and unlocking
Under unlocked status (indicator 12 is off), long press "CHILD LOCK" for 3 seconds to lock
control panel and indicator 12 is on. Under locked status, long press "CHILD LOCK" for 3
seconds to unlock the control panel. If no other keys are pushed within 30sec under the
unlocked status, it will enter into the locked status automatically.
Ice-making switch
To activate the ice maker, press the “ICE-MAKER” and the “ICE-MAKING” icon will illuminate.
The ice maker will begin to make ice. To turn off the ice maker, press “ICE-MAKER”. The ice
maker will stop making ice. When the freezer temperature below -5℃, the ice maker needs 135
minutes to 240 minutes to complete ice according to different ambient temperature.
17
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
Energy saving mode
In order to save energy, this mode sets the temperature in the refrigerator at 7℃ and the
temperature in the freezer at -15℃. “AUTO” mode default settings are 5℃ and -18 ℃,
respectively.
To activate the “Energy Saving” mode, press the ENERGY SAVING MODE button and the
“ENERGY SAVING” icon will illuminate. Enabling the energy saving mode for the refrigerator
will automatically disable all other modes.
To de-activate “Energy Saving” mode, do any of the following:
1. Select another mode.
2. Press REF. TEMP. or FRZ. TEMP. to exit setup.
3. Press ENERGY SAVING MODE button to exit the energy-saving mode when any of the
above situations occur.
4. Press AUTO MODE to exit the energy-saving mode when any of the above situations occur.
Auto mode
This function will set the temperature of the refrigerator compartment to 5℃"and the freezer
compartment to -18℃. If the refrigerator compartment is turned off, the auto mode will still be in
effect for the freezer compartment.
To activate Auto Mode, press AUTO MODE and the “AUTO” icon will illuminate, indicating the
activation of “AUTO MODE”. Selecting “AUTO MODE” will automatically de-activate all other
modes.
To toggle between Celsius and Fahrenheit display, press and hold “AUTO MODE” button for
three seconds.
To de-activate Auto Mode:
1. Select another mode.
2. Press REF. TEMP. or FRZ. TEMP. to exit setup.
Fast-cooling mode
This mode is used to counteract a sudden rise in the temperature of the refrigerator
compartment, especially when a large quantity of items is placed into the refrigerator after a trip
to the supermarket. The compressor will work for longer cycles to maintain the desired
temperature.
To activate the “Fast-Cooling” mode, press REF Temp for three seconds and the “Super Cool”
icon will illuminate. When the fast-cooling mode is activated for the refrigerator compartment, all
other modes are automatically de-activated.
The “Fast-Cooling” mode can be de-activated by doing any of the following:
1. Activate the “Energy-Saving” or “AUTO” mode.
2. Press REF. TEMP. to adjust the temperature.
3. Hold down REF. TEMP. for three seconds. When the temperature of the refrigerator
compartment reaches the set temperature, “Fast-Cooling” mode will be automatically de-
activated.
18
WWW.VINOTEMP.COM
!
!
Fast-freezing mode
This function is used to counteract a sudden rise in the freezer compartment in order to
preserve the nutritional content of the food. It is recommended that this mode be activated at
least two hours before a large quantity of items is placed into the freezer.
To activate the “Fast-Freezing” mode, press FRZ. TEMP. for three seconds and the Super Frz.
icon will illuminate. When the “Fast-Freezing” mode is activated for the freezer compartment,
the “Energy-saving” mode or AUTO MODE will automatically be de-activated.
The “Fast-Freezing” mode can be de-activated by doing any of the following:
1. Activate the “Energy-Saving” or “AUTO” mode.
2. Press FRZ. TEMP. to adjust the temperature.
3. Press and hold FRZ. TEMP. for three seconds. When the temperature of the freezer
compartment reaches the set temperature, “Fast-freezing” mode will be automatically de-
activated.
Turning off the refrigerator compartment
The refrigerator compartment can be independently turned off. When the refrigerator
compartment is turned off, the freezer compartment will remain working. This function is
recommended when the refrigerator compartment will remain empty for a long period of time.
To independently turn off the refrigerator compartment, press and hold the ENERGY SAVING
MODE button for three seconds. The “Refrigerator Compartment” icon will go out and the “OFF”
icon will illuminate. The REFRIGERATOR TEMPERATURE digital display will read shows “—”.
To turn the refrigerator compartment back on, press and hold the “Energy Saving” button for
three seconds. The “Refrigerator Compartment” icon will illuminate, the “OFF” icon will go out,
and the REFRIGERATOR TEMPERATURE digital display will return to normal.
To set the temperature of the refrigerator compartment
Press the REF. TEMP. button and the REFRIGERATOR TEMPERATURE digital display will
illuminate. To change the temperature setting, press the REF.TEMP. button again until the
desired temperature is displayed. The temperature of the refrigerator compartment can be
adjusted between 7 and 1 degrees in Celsius with a step of 1°C or between 34 and 44 degrees
in Fahrenheit with a step of 1°F.
To set the temperature of the freezer compartment
Press the FRZ. TEMP. button and the Freezer Temperature digital display will illuminate. To
change the temperature setting, press the FRZ. TEMP. button again until the desired
temperature is displayed. The temperature of the freezer compartment can be adjusted
between -13 and -22 degrees in Celsius with a step of 1°C or between 9 and -8 degrees in
Fahrenheit with a step of 1°F.
19
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
CLEANING AND MAINTENANCE
Refrigerator’s Maintenance and Repair
Cleaning
Clean regularly dust from the back of refrigerator and ground.
Clean regularly the space inside the refrigerator to avoid any unpleasant smell.
Before cleaning, pull out the plug and use soft towels and neutral detergent and clean it finally
with clear water. It is recommended to clean once half a year.
Never use following substances to clean the space inside the refrigerator:
Alkaline or weakly alkaline detergent (it might cause cracking of the liner and plastic parts).
Soap powder, benzoline, thinner, alcohol and etc. (might damage plastic parts).
Wipe off edible oil or flavoring immediately (might cause cracking of plastic parts).
Shutdown
When the refrigerator isn't used for a long period:
Pull out the power cable to avoid any potential risks that the old power cable may cause, such
as electric shock or fire.
Clean the space inside the refrigerator
Open the door for a period for drying, close the door with a gap left to avoid unpleasant odor.
Power outage
Reduce the times of door opening during power outage, don't put fresh food inside the
refrigerator anymore.
Disposal
When you discard an unused refrigerator, remove the door seal to avoid locking children inside
the refrigerator.
Danger
Risk of child entrapment. Before you throw away your old refrigerator or freezer:
1. Take off the doors.
2. Leave the shelves in place so that children may not easily climb inside.
20
WWW.VINOTEMP.COM
!
!
MAINTENANCE & TROUBLESHOOTING
Check your problem by using the chart below and try the solutions for each problem. If the
refrigerator still does not work properly, contact the nearest authorized service center. Please
read the following contents before repair request.
Occurrence
Possible Cause / Inspection Items
Not working
Whether the power is switched on.
Whether the plug is secured.
Whether the voltage is too low.
Can’t freeze properly
Whether the temperature is set too high (might reduce
the temperature as required).
Whether too much food is stored.
Whether hot foot is stored.
Whether the door is opened and closed too frequently.
Whether there is hot source around the refrigerator.
Whether the door seal is closed.
Loud noises
Whether the ground is leveled and the refrigerator is
placed on leveled ground.
Whether accessories of the refrigerator are put at the
right position.
Food is frozen inside the
refrigerator compartment.
Whether the food is put near the air outlet.
The refrigerator has
unpleasant smell.
Food with special odor shall be tightly wrapped.
Check whether the food has gone bad.
Clean inside the refrigerator.
• If the situation doesn't turn better after you have checked all above items, please
contact with the after-sales Service Centers. If power cables are damaged, please get it
changed by the repairmen designated by our Service Centers to avoid any risk.
• Normal phenomena not regarded as malfunctioning.
• Refrigerant inside the capillary tubes of the refrigerator flow in high speed and might
have a few amount of bubbles. Hence, irregular noises might appear at the outlet.
• When the air humidity is excessively high, moisture or water droplets might appear
around the refrigerator's door. You just need to wipe it off.
• No extension cord used.
21
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
TERMS & CONDITIONS
Shipping/Delivery fees are the responsibility of the Purchaser. Seller is not responsible for the
carrier’s missed/Non delivery for any reason. Delivery is curbside. Optional upgrades in delivery
service is an additional fee. If upgraded delivery service cannot be performed properly, Purchaser
agrees to accept delivery curbside and the difference in upgraded cost will not be refunded. If
item with free shipping/freight is canceled in transit, a charge of 25% of the price of the unit/s plus
freight costs both ways will be charged. All damages must be noted at time of delivery on BOL
and Seller to be notified within 48 hours of delivery of such damage. Purchaser acknowledges if
cancelation is authorized by Seller, a 35% restocking fee and freight both ways will be charged.
No cancelation or refund on made-to- order products. If an order has been placed and production
has not started, cancellation fee of 15% of total amount will be charged. Cancelled orders paid
by Credit Card will have an additional fee of 3% deducted from the total refund. Refurbished units
are sold as is. Purchaser assumes risks to the quality and performance of goods and assumes
the costs of all necessary service or repair not covered herein.
(Box here for check mark) Accept Terms & Conditions
Vinotemp International Corp. (“Seller”) and the person or entity that acquires these goods from
Seller (“Purchaser”) hereby fully agrees to the following terms and conditions of the sale:
Shipping/Delivery fees are the responsibility of the Purchaser whether freight prepaid or freight
collect. Seller assumes responsibility for the goods sold to the Purchaser until the goods have
reached Purchaser’s delivery address (FOB Destination) and the delivery receipt is signed clear.
Seller is not responsible for the carrier’s late delivery, missed delivery, unpaved roads, remote
locations, stairs, elevators, narrow door openings and other such issues in attempting to fit or
deliver the goods into the Purchaser’s location. Delivery to remote locations may require
additional fees. Remote location may be defined at the discretion of the carrier as more or less
than 50 miles from the nearest major city. Purchaser assumes all responsibility for additional
costs related to freight such as access, measurement, installation, hookup, wiring, moving and
storage of the goods, flight of stairs, carrier’s inability to safely and/or adequately deliver, inability
to use the building elevator to lift the goods, narrow openings, along with any additional costs to
deliver or redeliver the product properly. Make sure to review access to the property and size of
the product ordered. The transportation of all goods is subject to the terms and conditions which
the carrier imposes on Purchaser. Installation is the responsibility of the Purchaser. If white glove
delivery was ordered and cannot be performed properly, or access is hindered in any way,
Purchaser agrees to accept delivery curbside (delivery service cannot be refunded). If Purchaser
will-calls or pays for their own freight responsibility transfers to the Purchaser when the Purchaser
or Purchasers freight company picks up the unit from Seller. Freight quoted are either curbside,
threshold or white glove. Standard white glove delivery is main floor, easy access and NO
STAIRS, Doors, aligned feet attached (if necessary) and removal of packaging, additional fees
for additional requests. Each service has a different rate and will require additional fees. If freight
is not charged (Free Shipping or Freight Included) and the order is cancelled after shipping, a
freight charge of 25% of the cost of the unit, each direction will be charged. Item swap outs are
arranged as curbside delivery and pickup unless noted otherwise. There is no white glove service
for returns. Approved returns must have original and/or proper packaging. Swap-outs (Delivery
and Pick up are at the same time) Original unit must be packed and ready for carrier pick up at
time of delivery of new unit. Packaging of old unit must be adequate for shipping, not oversized
or on a pallet if unit was not originally delivered on a pallet. Carrier will not drop off new unit if the
original unit is not ready. If the carrier has to make a second attempt, customer will be subject to
additional charges for the attempted delivery and for any packaging issues. Deliveries include
ONE attempt by the shipping company to deliver the product to the consumer. If for any reason
the customer is unavailable to accept the order and the product is undeliverable under any
circumstances, the customer will be responsible for any extra shipping and handling charges.
22
WWW.VINOTEMP.COM
!
!
We are a manufacturer not a shipping company, deliveries are done by a 3rd party service. Email
Continental USA (excluding Alaska, Puerto Rico, Hawaii), cost is additional please email
[email protected] for a quote.
California Proposition 65 Warning: The products sold on this ecommerce website and to the
public may contain chemicals and other substances known to the State of California to cause
cancer and birth defects and other reproductive harm.
Totes made of vinyl, imitation leather, and/or leather material contain lead and/or other
substances that are known to the State of California to cause cancer, birth defects and other
reproductive harm.
Microfiber “Plastic microfiber” means a small synthetic particle that is fibrous in shape, less than
5 millimeters in length, and is released into water through the regular washing of textiles made
from synthetic material.
Composite wood: May contain formaldehyde.
Galvanized metal and some of its constituents contain lead and/or other substances that are
known to the State of California to cause cancer, birth defects and other reproductive harm.
Products made of vinyl contain lead, Diethyl Hexyl Phthalate (DEHP), and/or other substances
that are known to the State of California to cause cancer, birth defects and other reproductive
harm.
Acrylic may contain Acrylic Acid and/or other substances that are known to the State of California
to cause cancer, birth defects, and other reproductive harm.
Appliances may contain tin or lead in either the paint or the controllers, and/or other substances
that are known to the State of California to cause cancer, birth defects, and other reproductive
harm.
Our barware items may contain plastic, acrylic, enamel, crystal, metal and/or other substances
that are known to the State of California to cause cancer, birth defects, and other reproductive
harm.
Appliances may contain Tin, Lead or Nickel
Damage: All damages must be noted at time of delivery. If a bill is signed that there is no damage,
buyer accepts delivery as free and clear. Any claim for damages of the goods, when FOB
Destination, that incurred during shipment by the carrier are insured and handled directly with the
carrier by the Seller if noted on the receipt and notified within 48 hours of delivery. OPEN AND
INSPECT YOUR DELIVERY. When FOB Destination, if the item is damaged by the freight
company, and Purchaser cancels rather than accepts a replacement, the order can be cancelled
by paying for freight costs both ways and a 35% restocking fee for stocked items. No cancellation
or refunds on custom/made or made to order products. When shipped 3rd Party (FOB
Warehouse), Purchaser assumes all responsibility for delivery, payment of freight and freight
claims for damages during shipment. Manufacture defects will be handled directly with Seller,
subject to the limited warranty below.
Fees: All sales are final. Unless authorized in writing by the Seller, Purchaser may not return the
goods under any circumstance. If Seller agrees in writing to take back stocked goods, there will
be a restocking/service fee that is 35% of the purchase price of the goods and freight both ways
(product must be new, unused, and in original packaging). If Purchaser returns goods claiming
that the goods are defective and goods are found to be in working condition by the Seller,
Purchaser is liable for the cost of freight both ways plus and a service fee that is 35% of the
purchase price of the goods. Built to Order and Custom products are nonreturnable,
nonrefundable. Purchaser must notify Seller of nonconforming goods within 48 hours of receipt,
after which time all goods are deemed accepted by the Purchaser. If an order has been placed
and production has not started, cancellation of your order will be a 15% charge. If Purchaser
tenders payment with a check that has insufficient funds (NSF), a collection fee plus NSF fee of
$50 will be added to the invoice, which Purchaser agrees to pay promptly. If Purchaser puts a
23
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
stop payment on a check or credit card for any reason, Purchaser agrees to pay for all costs
associated with the Seller’s collection or litigation of such a claim, including, without limitation,
general and special damages, court costs and attorneys’ fees. Finance charges begin the date
of invoice. Title to the goods reverts back to the Seller in the case of nonpayment of goods or
services. All fees and costs to retrieve the product, cost of freight, legal costs, collection fees and
court fees, credit card fees and interest rate of 18% (annual rate) will be the responsibility of the
Purchaser. In a credit card dispute, Purchaser assumes and must immediately pay any “credit
card arbitration” fees and chargeback fees which the credit card companies charge at the time of
the chargeback. Cancelled orders using a Credit Card will have an additional fee of 3% deducted
from the refund. Any disputes not resolved within 30 days from the invoice date will be reported
to credit reporting agencies.
LIMITED WARRANTY: Seller warrants that the goods will be free of defects in materials and
workmanship as follows:
Furniture style (wood) wine cabinets made in the U.S.: all cooling unit parts only for a period of 1
(year) year; cabinetry and labor (uninstalled) for a period of 12 (twelve) Months (Model numbers
“Vino” and “Custom”.
Metal cabinet units (appliances) (compressor) (made in China and Denmark)(Model numbers
start with EL, VT, IL, or EP: parts and labor for cooling system and cabinetry for a period of 12
(twelve) months.
Thermoelectric Units: 90 (ninety) days (including Wine and Beverage Coolers, Beer Dispensers,
Humidor, Portofino Wood Cellars, and Refrigerators). (Models start with EL, VT, IL or EP).
WineMate and Cellar Tec (WM, Wine Mate or CT)(Wine Cooling Units) Split and Ducted Systems
and other installed cooling units are parts only for 1 year, no labor. Self Contained WineMate
Cooling Systems are 1 year parts, 1 year labor. Removal and reinstallation of cooling units is not
included.
Wine Accessories, Racking Systems, Parts and Other miscellaneous items is a 30 day warranty.
Il Romanzo units: Warranty 90 (ninety) days. Replacement part 12 (twelve) months from the date
of sale.
Brama: 1 year warranty from date of purchase.
Non-New Units (Scratch & Dent/Refurbished/Floor Models), warranty for compressor units is 90
days from your dated invoice and 30 days for thermoelectric units (parts for function only, not
cosmetic defects). These units are refurbished and sold as is; Purchaser assumes risks to the
quality and performance of goods and assumes the costs of all necessary service or repair not
covered herein. Extended warranties via New Leaf may not be purchased on Non-New Units.
Delivery is curbside. Upgrades in delivery will require an additional fee.
Element Grills (via Element Products LLC), grills have a thirty day limited parts warranty on grill
accessories.
If a model is not listed here will have 90 day warranty on parts only if it’s a new item.
Parts and Repairs: Warranty on in-house repairs: 90 days parts and labor for compressor; 30
days parts and labor for Thermoelectric; Customer is required to put down a labor deposit of $75
for Thermoelectric units; $150 for compressor based Wine Coolers and $195 for WineMate units
which will be kept if a unit is found to be in good working condition. Customer is responsible for
freight costs to us.
Warranty on parts purchased: 30 days; if part fails within 30 days of purchase, customer is to
ship us back the part; upon inspection, if defective, VT will send replacement part at no charge.
If a purchaser claims a product is “defective” with regards to refrigeration, Purchaser must obtain
a letter from a qualified refrigeration technician at the Purchaser’s cost to verify that the unit was
installed properly, with proper ventilation and the unit is truly malfunctioning due to a
manufacturing defect.
24
WWW.VINOTEMP.COM
!
!
Removal or reinstallation of a unit is not included in warranted costs. Purchaser’s exclusive
remedy is limited at Seller’s option to repair or replace defective part[s] with either new or
reconditioned part[s]. Purchaser is responsible for shipping the unit prepaid to a designated
facility and Seller will pay return shipping charges in the continental United States for items
repaired under warranty within 12 (twelve) months from date of sale. The returned unit must be
packaged correctly, with enough protection to ensure the unit is not further damaged. Oversized
or lack of packaging is not permitted and will be refused. Replacement or exchanged units will
be returned to Purchaser through curbside delivery only. Any redelivery fees are the Purchasers
responsibility. Since the natural variation in texture, density, grain, color, tone, and shade of wood
is unavoidable; Seller does not guarantee the texture, color, tone, or shade of the wood: nor does
seller guarantee the colorfastness of wood or against peeling, chipping, cracking, or scratching.
Note: Unfinished wood is subject to warping; all wood surfaces must be sealed before placing
cellar into service. Make sure doors are aligned by reviewing the owner’s manual. Improper repair
or placement of the unit will void the warranty. Any third party repair facility must be preapproved
in writing by Seller, before providing replacement parts under warranty. Change Orders: Custom
units already in production that require a change will be subject to a change order fee.
Storage Fees: When having an item serviced by a Vinotemp service technician at the Vinotemp
facility, Purchaser agrees to pick up their repaired item or make arrangements for return shipping
within a 30 day period once they have been notified by Vinotemp through phone call, email, or
letter that their unit is ready for pick up. If the item remains in the Vinotemp warehouse after 30
days but no longer than 60 days, the Purchaser will incur additional storage fees of 2%. After 60
days in storage, the item will become property of Vinotemp. For custom units with deposits: If
product is not picked up or shipped within 60 days of completion, Purchaser deposit is forfeited
and product becomes the property of Vinotemp. Warranty period is from the date of sale (not
from shipping, delivery, nor installation). All completed cabinetry, racking, or other custom work
must be picked up or shipped within a period of 14 days after Vinotemp has notified the Purchaser
by phone call, email, or letter. Any completed cabinetry, racking, or other custom work stored
longer than 14 days will incur an additional monthly storage fee. After 60 days, the product will
become property of Vinotemp.
This Limited Warranty does not cover damage due to such things as accident, misuse, abuse,
mishandling, neglect, acts of God, fires, earthquakes, floods, high winds, government, war, riot
or labor trouble, strikes, lockouts, delay of carrier, unauthorized repair, or any other cause beyond
the control of the Seller, whether similar or dissimilar to the foregoing. Seller is not responsible
for any damages caused to Purchaser's property resulting from the goods. This limited warranty
applies only inside the Continental US (Alaska, Puerto Rico, Hawaii and other territories/countries
are not warranted). Purchaser understands and acknowledges that the goods sold here are wine
cellars, cigar humidors, and/or other similar units which house wine or cigars or other items.
Purchaser assumes all risk of using these units, including risk of spoilage, humidity variations,
temperature variations, leaks, fire, water damage, mold, mildew, dryness and similar and any
other perils that might occur. Seller is not responsible for incidental or consequential damages,
and there are no warranties, expressed or implied, which extend beyond the Limited Warranty
described above. Warranty and liability are nontransferable. The implied warranties of
merchantability and of fitness for a particular purpose are hereby expressly disclaimed. Some
states do not allow the exclusion of incidental or consequential damages, or a waiver of the
implied warranties of fitness and/or merchantability, so the above limitations may not apply to
you. This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. Seller disclaims any indemnification for claims of infringement of any
intellectual property of protectable nature. In the event of any dispute between Seller and
Purchaser arising out of or relating to these terms and conditions or to the goods sold generally,
Purchaser must first file a written claim with Seller within ten days of the occurrence giving rise
to the claim and wait an additional thirty days for a response before initiating any legal action.
The sale and all terms are subject to Nevada law. Any legal proceeding arising out of or relating
to these terms and conditions or to the goods sold Purchaser shall bring, solely and exclusively
25
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
in Clark County. In no event may Purchaser initiate any legal proceeding more than six months
after the occurrence of the event giving rise to the dispute. Seller may make nonpayment claims
until debt is paid in full. Any dispute or claim relating in any way to these to the Terms and
Conditions, the Website, or any products or services sold or distributed by or through this
Website, store, or catalog will be resolved by binding arbitration, rather than in court, except that
you may assert claims in small claims court if your claims qualify. The Federal Arbitration Act and
federal arbitration law apply to the Terms and Conditions. We each agree that any dispute
resolution proceedings will be conducted only on an individual basis and not in a class,
consolidated or representative action. If for any reason a claim proceeds in court rather than in
arbitration we each waive any right to a jury trial. Both parties agree to bring suit in court to enjoin
infringement or other misuse of intellectual property rights.
The above terms and conditions are the only ones governing this transaction and Seller makes
no oral representations of any kind. These Terms and Conditions can only be modified in writing,
signed by both Purchaser and Seller.
SPECIFIC WARRANTY BELOW for SCRATCH & DENT/OPEN BOX/ REFURBISHED/FLOOR
MODELS/ CLOSEOUTS, OVERSTOCK: TERMS AND CONDITIONS OF SALE
Vinotemp (and its brands Element, Wine Mate, Cellar Tec, Apex Wine Racks, Epicureanist Il
Romanzo, Brama(“Seller”) and the person of the entity that acquires these goods from Seller
(“Purchaser”) hereby fully aggress to the following terms and conditions of the sale:
1. Freight: Vinotemp is not a freight, moving or installation company, if Freight is arranged for the
Buyer, the Seller assumes no responsibility for the goods sold to the Purchaser once the goods
have left the Seller’s premises, including, but not limited to, late delivery by the moving carrier, or
for events caused by any difficulty carrier incurs in attempting to fit the goods into the Purchaser’s
place of business or residence due to the size of the goods or otherwise, such as the disassembly
and reassembly of the goods. Purchaser assumes all responsibility for delivery, payment of
freight, extra fees, access, measurement, installation, hook-up, moving and storage of the goods.
The transportation of all goods is subject to the terms and conditions which the moving carrier
imposes on Purchaser including, but not limited to, additional charges imposed per flight of stairs,
and/or additional charges resulting from the carrier’s inability to safely and/or adequately use the
building elevator to lift the goods to an upper floor. Any claim for damages incurred during
shipment by the carrier of the goods are insured and handled directly with the carrier and must
be noted at time of delivery.
2. All sales are final, and unless authorized in writing by the Seller, Purchaser is not entitled to
return goods, under any circumstances. If Purchaser refuses to accept goods, the Purchaser is
liable for the return and cost of freight both directions and a restocking/service fee that is 35% of
the purchase price of the goods. Purchaser must notify Seller of non-conforming goods within
four days of delivery, after which time all goods are deemed accepted.
3. If Purchaser tenders payment with a check that has insufficient funds (NSF), or stops payment
on a check or credit card for any reason, Purchaser agrees to pay for all costs associated with
the Seller’s connection or litigation of such a claim, including without limitation extra damages,
court costs, collection fees and attorney’s fees. Finance charges begin the date of invoice.
Collection fees plus NSF fee of $50 will be added to your invoice, which you agree to promptly
pay. Title to the goods does not pass until payment is received in full by Seller and Seller retains
a security interest in the goods until they are paid for in full. If the credit card dispute goes to
arbitration, Buyer agrees to pay for credit card arbitration fees.
4. LIMITED WARRANTY on Non-New Units (Scratch & Dent/Refurbished and Floor Models):
warranty for compressor units is 90 days from your dated invoice and 30 days for thermoelectric
units (parts for function only, not cosmetic defects). These units are refurbished and sold as is;
26
WWW.VINOTEMP.COM
!
!
Purchaser assumes risks to the quality and performance of goods and assumes the costs of all
necessary service or repair not covered herein. Wine Accessories, Racking Systems and other
items not mentioned are not warranted. There is no warranty on parts purchased separately.
Removal and re-installation of unit is not included in warranted labor. Purchaser’s exclusive
remedy is limited, at Seller’s option; to repair or replace defective part[s] with either new or factory
reconditioned part[s]. Purchaser is responsible for shipping the unit pre-paid to designated facility
and Seller will pay return shipping charges in the continental United States for items repaired
under warranty. Since the natural variation in texture, density, grain, color, tone and shade of
wood is unavoidable; Seller does not guarantee the texture, color, tone or shade of the wood:
nor does seller guarantee the colorfastness of wood or against peeling, chipping, cracking or
scratching. Note: Unfinished wood is subject to warping; all wood surfaces must be sealed before
placing cellar into service. Improper placement of the unit will void the warranty. By Vinotemp in
writing, any 3rd party repair facility must be pre-approved before providing parts free of charge.
5. Freight: If As-Is unit is shipped including freight and delivery is denied, customer is responsible
for freight to and from buyer. Other costs Buyer is responsible for is storage, repackaging, and
attempted delivery fees.
6. Vinotemp does not cover damage due to such things as accident, misuse, abuse, mishandling,
neglect, acts of God, fires, earthquakes, floods, high winds, government, war, riot or labor trouble,
strikes, lockouts, delay of carrier, unauthorized repair, or any other cause beyond the control of
the Seller, whether similar or dissimilar to the foregoing. Seller is not responsible for any damages
caused to Purchaser's property resulting from the good. This limited warranty applies only inside
the Continental US. (Alaska, Puerto Rico and Hawaii are not warranted.)
7. Purchaser understands and acknowledges that the goods sold here are wine coolers,
appliances, cigar humidors, and/or other similar units which may house wine or cigars or other
consumables. Purchaser assumes all risk of using these units, including risk of spoilage, humidity
variations, temperature variations, leaks, fire, water damage, mold, mildew, dryness and similar
perils that might occur.
8. UNLESS OTHERWISE PROVIDED BY APPLICABLE LAW, SELLER IS NOT RESPONSIBLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, AND THERE ARE NO WARRANTIES,
EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE
HEREOF; WARRANTY AND LIABILITY ARE NON-TRANSFERABLE. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY EXPRESSLY DISCLAIMED. SELLER DISCLAIMS ANY INDEMNIFICATION
FOR CLAIMS OF INFRINGEMENT OF ANY INTELLECTUAL PROPERTY OF PROTECTABLE
NATURE.
9. In the event of any dispute between Seller and Purchaser arising out of or relating to these
terms and conditions or to the goods sold generally, Purchaser must first file a written claim with
Seller within thirty days of the occurrence giving arise to the claim and wait an additional thirty
days for a response before initiating any legal action. Any legal proceeding arising out of or
relating to these terms and conditions or to the goods sold generally shall be brought solely in
Clark County. The prevailing party in any such proceeding is entitled to its attorney’s fees and
costs. In no event may Purchaser initiate any legal proceeding more than six months after the
occurrence of the event giving rise to the dispute.
10. Delivery is curbside. Upgrades in delivery will require an additional fee.
The above terms and conditions are the only ones governing this transaction and Seller makes
no oral representations of any kind. These Terms and Conditions can only be modified in writing,
signed by both Purchaser and Seller. 02/05/2019
27
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
28
WWW.VINOTEMP.COM
!
!
SERVICE & IMPORTANT NOTICE
Upon receipt and inspection of unit, the supply cord must be replaced if it is damaged. Contact
The manufacturer has a policy of continuous improvement on its products and reserves the
right to change materials and specifications without notice.
WARNING:
Please do not place the unit within reach of children.
For adult use only
www.vinotemp.com
Add a New Leaf extended warranty to your order, and have the security of knowing that if there should be a problem,
even years in the future, New Leaf will be there to assist! Usable for any Wine Cellar or other electronic device
manufactured by Vinotemp. Add this warranty to purchases made from vinotemp.com or other qualified venders.
Warranty must be registered within the first 10 days from original purchase.
Visit www.Vinotemp.com to purchase.
732 S. Racetrack Road
Henderson, NV 89015
www.vinotemp.com
Vinotemp is a registered trademark of Vinotemp International. All products, features, and services are subject to change without notice. We
cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
© 2020 Vinotemp International. All rights reserved.
