Loading ...
Loading ...
Loading ...
;
;
;
position, using the handle (16);
35
Fig. 19
EN
EXECUTION OF THE SHARPENING
5.
Allow the blade to rotate for about 30 to 40 seconds and then use the switch to stop
it checking with a slight shift (using a pencil) to the outside of the blade if the burr is
formed
.
We reccomend to perform this check very carefully as
the blade is very sharp.
Ascertained the formation of the burr, restart the blade and hold for 10 seconds the
wheel button (16b).
4a
16b
4
16a
16
Loading ...
Loading ...
Loading ...