Loading ...
Loading ...
Loading ...
8
2.3 CONNECTING THE REVERSE CAMERA
2.3.1 INSTALLATION GUIIDE
1. Select a flat and centred location near the number plate lamp at the rear of the vehicle to mount
camera.
2. Attach tape to the bracket of the camera to hold the camera in position while installing, and drill two
small holes, one for the first screw, the second to run the reverse camera cable through. (Refer to fig
2.3.1)
3. Use a screw driver to fix the first screw, leaving the screw loose enough to adjust the camera.
(Refer to fig 2.3.2)
4. Insert the camera wire through the intended drilled hole checking the installation position. (Refer
to fig 2.3.3)
5. Mark the position suitable for the second screw and drill a small hole for it. (Refer to fig 2.3.4)
6. Fix the second screw and securely tighten both screws. (Refer to fig 2.3.5)
2.3.2 REVERSE CAMERA WIRING DIAGRAM
Fig 2.3.1
Fig 2.3.2
Fig 2.3.3
Fig 2.3.4
Fig 2.3.5
*Please be sure to connect the 6M cable to the port labeled AV In
Loading ...
Loading ...
Loading ...