Loading ...
Loading ...
Loading ...
11
2.8 USING THE MCPK-43DVR
2.8.1 RECORDING VIDEO
When the Mirror DVR is connected to your vehicles 12v power supply, the Mirror DVR will automatically power up and begin
recording when you start your vehicle. During the start up the buttons will be unresponsive and the camera will take a moment to
begin recording. The Mirror DVR will automatically stop recording and shutdown when your vehicle is powered off.
Note: 1. Because of how some vehicles are wired, the recording may continue when the engine is switched off. If this happens, please manually turn off the Mirror
DVR or remove the car adapter from the cigarette lighter when not in use.
2. The recording loop length can be configured to save a video file for every 2,3,5 or 10 minutes of recording. For information on how to adjust this setting
please refer to the
Loop Recording section of this manual.
3. The device saves the recorded footage and Photos on to the inserted Micro SD Card. If the memory card capacity is full, the oldest file in the memory card
will be overwritten.
4. The reverse camera is designed to assist with reversing and is not designed to record. Recording will only be captured using the front facing camera.
2.8.2 LOCKED RECORDING
Locked Recording saves the current video file and protects it from being overwritten. To manually start a Locked Recording
follow the instructions below.
1. During recording push the
button.
2. To stop recording press the
button again.
Note: 1. If the G Sensor function is enabled and a collision is detected, the device will automatically trigger the Locked Recording and protect the current video
file. Please refer to the section titled
G Sensor for information on adjusting this setting.
2. The emergency recording file is created as a new file, which will be protected to avoid being overwritten by normal loop recording. If the inserted Micro
SD Card fills up with
Locked Recording files the message “SD Card Full” will appear on the screen, and the oldest Locked Recording file will be
automatically deleted when a new
Locked Recording file is created.
2.9 REVERSE CAMERA
The Reverse Camera is designed to assist with reversing by showing your rear view from your bumper reducing blind spots. When
installed correctly, the Reverse camera will activate when your vehicles reverse gear is selected, and the reverse cameras feed will be
displayed on screen. When your vehicles reverse gear is disengaged the Reverse Camera will power down and the MCPK-43DVRs
screen will revert back to displaying the front facing camera feed.
Note: 1. The Reverse Camera is designed to assist with reversing your vehicle, and will not record.
2. The Reverse Camera this is a visual aid and will allow you to view what is behind the vehicle, it does not remove the responsibility of driving the vehicle from
the driver.
3. To ensure correct operation, it is highly recommended that the Reverse Camera is professionally installed.
Loading ...
Loading ...
Loading ...