Loading ...
Loading ...
Loading ...
i,
ratio
CENTER
WORKPIECE
LEFTOFCENTEa
WARNING: APPLYING THE WORKPIECE TOTHE
RIGHT SIDE COULD CAUSSEI IT TO FLYIUP
(KICKBACK) WHICH COULD BE HAZARDOUS.
Always position the workpiece to the eft of center on
sanding disc with disc rotating counter-clockwise: as
shown.
The table may be tilted for beveled work.
L I L II JL_ _
maintenance
WARNING: FOR YOUR OWN SAFETY, TURN
SWITCH "OFF" AND REMOVE PLUG FROM POWER:
SOURCE OUTLET BEFORE ADJUSTING, MAIN-
TAINING, OR LUBRICATING YOUR BELT AND DISC
SANDER.
tf power cord is worn or cut, or damaged in any way,
have it: replaced immediately.
Frequently blowout or vacuum out any dust that may
accumulate: inside the motor.
M
B'LACK _ BLACK JUMPER p WER CO_
WXLTEs_ L - -/_------_ p-
,_' WHITE ,.___. GREEN ''*
A coat of automobile-type wax applied to the worktable
will make:it a little easier to feed thework:while fihishing.
WIRING DIAGRAM
Donot apply wax to the abrasive belt table because
the belt could pick up the wax and deposit it on the
pulleys, causing the belt to slip.
LUBRICATION
The BALL BEARING_ in this machine are packed
with grease at the factory. They require no further
lubrication.
18
Loading ...
Loading ...
Loading ...