Loading ...
Loading ...
Loading ...
etting to know your be isc sander
WARNING: TO AVOID INJURY FROM ACCI.
DENTAL START, TURN SWITCH "OFF" AND
REMOVE PLUG FROM POWER SOURCE OUT.
LET BEFORE MAKING ANY ADJUSTMENTS.
SANDING
DISC
SANDING
PLATE
"l
BACKSTOP
LOCK
BOLT
1
BACKSTOP
BELT
2
BELT
TABLE
LOCKING
BOLTS
TABLE
WORKTABLE
ASSEMBLY
TABLE
SUPPORT
ROD
PULLEY 9 MOUNTING
COVER BELT ON-OFF HOLES
TABLE SWITCH
STOP
8
AUXiLLARY
MOUNT1NG
HOLE
(WORKTABLE)
BASE 5
7 6 TABLE
TOGGLE TABLE ASSEMBLY
BOLT LOCK LOCK
KNOB SCREW
TRUNNION
1, Backstop ... Supports the workpiece on the
sanding belt.
2. Belt Table Locking Bolts... Loosening bolts
allows belt table to be raised to the vertical
position,
5. Table Assembly Lock Screw . . . Locks the
table assembly onto the table support rod.
6. Table Lock Knob... Loosening knob allows
the worktable to be tilted for bevel sanding
(Scale on table trunnion).
,
4.
Tracking Knob . . , Turning knob clockwise
causes sanding belt to move towards the
disc; turning knob counterclockwise causes
sanding belt to move away from the disc.
Tension Knob... Sliding knob to the right re-
leases the sanding belt tension; sliding knob
to the left applies belt tension.
7, Toggle Bolt ........ Locks the rod into the base,
8, Auxiliary Mounting Hole . , . Allows table
assembly to be mounted for end sanding on
the belt side.
13
Loading ...
Loading ...
Loading ...