Loading ...
Loading ...
Loading ...
basWcoperation
BEVEL SANDING
The worktable can be tilted from 0°
bevel sanding. Loosen the table lock
tilt the worktable to desired angle
Retighten table lock knob.
45° for
knob and
as shown.
K_OB
. TABLE
/ SUPPORTROD
Loosen rod locking toggle bolt. Slide table in so the
table is no more than 1/16" from the sanding surface.
WARNING: TO AVOID TRAPPING THE WORK
OR FINGERS BETWEEN THE TABLE AND SAND-
ING SURFACE, THE TABLE SHOULD BE RE-
POSITIONED ON THE TABLE SUPPORT ROD TO
RETAIN A MAX|MUM OF 1/16-INCH DISTANCE
BETWEEN SANDING SURFACE AND TABLE
Retighten rod locking toggle bolt.
L
:- 1!6 !NCH
I
TOGGLE
BOLT
BELTTA
POSITIONING BELT TABLE
Two belt table locking bolts tock the belt table in
a vertical or horizontal position.
To adjust vertical position:
a. Remove the backstop,
b. Loosen the two belt table locking bolts using
a 1/2-inch wrench.
LOCKINGBOLTS
C,
Position belt table vertically as shown and
tighten the two bolts.
15
Loading ...
Loading ...
Loading ...