Loading ...
Loading ...
Loading ...
41
CARE AND MAINTENANCE (continued)
REPLACING THE OVEN LIGHT
• Let the oven cavity and broil burner cool down.
• Switch o the electric supply.
• Remove the protective cover.
• Unscrew and replace the bulb with a new one suitable for high temperature (200°~
500°F) having the same specifications: E14 120V 25W 300°C.
• Replace the protective cover.
Note: Oven bulb replacement is not covered by your guarantee.
LEVELING THE RANGE
The range must be level to obtain proper operating. The four screws type leveling legs
located on the corners at the bottom of range should be adjusted by turning them
clockwise to make the range higher or counter-clockwise to lower the range until the
range is level. Use a level on surface units to check the leveling of the range.
ANTI-TIP BRACKET INSTALLATION
To reduce the risk of tipping the range by abnormal usage or improper door loading,
the range must be secured by properly installing the anti-tip device packed with the
appliance.
• Place the anti-tip bracket on the floor as shown figure. Anti-tip bracket can be
installed on the right and left side.
• Make the locations of 2 (x2) holes of ant-tip bracket on the floor.
• Use a drill bit
• Secure bracket to floor using screws supplied.
• Slide appliance into position.
Note: If range is relocated, the bracket must be removed and installed in new location.
Loading ...
Loading ...
Loading ...