Loading ...
Loading ...
Loading ...
ASSEMBLY
_ ANGER:
DO NOT START THE ENGINE WITHOUT
THE GUIDE BAR AND CHAIN COM-
PLETELY ASSEMBLED. OTHERWISE,
THE CLUTCH CAN COME OFF AND
SERIOUS INJURY CAN RESULT.
ALWAYS WEAR GLOVES WHEN HAN-
DLING THE CHAIN.THE CHAIN CAN BE
SHARP ENOUGH TO CUT YOU EVEN
THOUGH IT ISTOO DULLTO CUTWOOD.
HOW TO ASSEMBLE YOUR CHAIN SAW
BAR AND CHAIN ASSEMBLY (Fig.6-12)
• Loosen and remove the 2 bar clamp nuts,
• Remove bar clamp
= Remove and throw away blue shipping spacer,
• Turn adjusting screw by hand counterclockwise until
adjusting pin just touches the stop.
• Mount guide bar with slotted end over both guide bar
mounting bolts, Slide guide bar behind clutch drum until
guide bar steps against the clutch drum sprocket, Install
the bar with "Craftsman" logo in up position(see Fig 8)
• Carefully remove chain from bag Position chain with the
drive links as shown Fig_9,
• Place chain over and behind the clutch drum Fig,10
, Fit bottom of drive links between teeth in sprocket nose
• Fit chain drive links into top of guide bar Fig,9,
Figure 6
Clutch Drum
Guide Bar
Mounting Bolts
Figure 8
Guide Bar
Gauge
Drive
Sprocket
Nose
CRRFTSMRN
Clutch Drum
Guide Bar
Mounting Bolts
Guide Bar
Figure 9
Adjusting
Screw
Adjusting Stop
Pin
Figure 7
Chain
Behind the
Clutch Drum
Figure 10
-8-
Loading ...
Loading ...
Loading ...