Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENTS
• Pull out 10" of rope and catch rope in notch in the
pulley.
. Carefully turn the puiley two complete turns clockwise,
keeping the rope against the notch to wind the spring,,
. While holding the pulley ratchet, pull the excess rope
through the starter rope hole, While holding tension on
the rope, let rope slowly rewind intothe housing,
• Reinstall fan housing by aligning the fan housing to the
chassis.Then white holding the fan housing against the
chassis, pull lhe rope handle out until you feel the fan
housing drop into place against the chassis. Slowly, let
the rope rewind intostarter housing
• Reinstall the 4 fan housing screws and tighten the 2
cylinder cover screws Figure 54.
L_
\
____/ Wind Up Spring
11(
Rewind for
Tension
Figure 58
- 26 -
Loading ...
Loading ...
Loading ...